|
1
|
U-Boot SPL 2013.10-00067-g45d90373e1c4-dirty (Oct 26 2016 - 15:44:35)
|
|
2
|
MitySOM335x profile 4 - Model No: 3354-HX-X38-RI Serial No: 15002248
|
|
3
|
Critical Link: Error u-boot not compiled with for 512MB nand support. Nand may not function correctly.
|
|
4
|
Configuring for 512 MB DDR3 @ 400MHz
|
|
5
|
Critical Link AM335X Maker Board -- NAND Page size = 2048k booting from dev 8
|
|
6
|
reading u-boot.img
|
|
7
|
reading u-boot.img
|
|
8
|
|
|
9
|
|
|
10
|
U-Boot 2013.10-00067-g45d90373e1c4-dirty (Oct 26 2016 - 15:44:35)
|
|
11
|
|
|
12
|
AM335X-GP rev 2
|
|
13
|
I2C: ready
|
|
14
|
DRAM: 512 MiB
|
|
15
|
WARNING: Caches not enabled
|
|
16
|
Critical Link: Error u-boot not compiled with for 512MB nand support. Nand may not function correctly.
|
|
17
|
NAND: Using 2k bch8 layout
|
|
18
|
ECC Mode = 2 lo = 56/0
|
|
19
|
0 MiB
|
|
20
|
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
|
|
21
|
*** Warning - readenv() failed, using default environment
|
|
22
|
|
|
23
|
Net: cpsw:2 is connected to cpsw. Reconnecting to cpsw
|
|
24
|
cpsw, usb_ether
|
|
25
|
Hit any key to stop autoboot: 0
|
|
26
|
U-Boot# run loadbootenv ; run importbootenv
|
|
27
|
reading uenv.txt
|
|
28
|
2654 bytes read in 4 ms (647.5 KiB/s)
|
|
29
|
Importing environment from mmc ...
|
|
30
|
U-Boot# run mmc_args;
|
|
31
|
U-Boot# setenv autoload no;
|
|
32
|
U-Boot# setenv fdtaddr 0x88000000
|
|
33
|
U-Boot# setenv fdt_high 0xFFFFFFFF
|
|
34
|
U-Boot# dhcp; tftp $fdtaddr am335x-mitysom-4.4.dtb; tftp $kloadaddr zImage; bootz $kloadaddr - $fdtaddr;
|
|
35
|
link up on port 0, speed 100, full duplex
|
|
36
|
link up on port 1, speed 100, full duplex
|
|
37
|
BOOTP broadcast 1
|
|
38
|
DHCP client bound to address 10.0.102.59
|
|
39
|
link up on port 0, speed 100, full duplex
|
|
40
|
link up on port 1, speed 100, full duplex
|
|
41
|
Using cpsw device
|
|
42
|
TFTP from server 10.0.62.1; our IP address is 10.0.102.59
|
|
43
|
Filename 'am335x-mitysom-4.4.dtb'.
|
|
44
|
Load address: 0x88000000
|
|
45
|
Loading: #####
|
|
46
|
1.7 MiB/s
|
|
47
|
done
|
|
48
|
Bytes transferred = 65339 (ff3b hex)
|
|
49
|
link up on port 0, speed 100, full duplex
|
|
50
|
link up on port 1, speed 100, full duplex
|
|
51
|
Using cpsw device
|
|
52
|
TFTP from server 10.0.62.1; our IP address is 10.0.102.59
|
|
53
|
Filename 'zImage'.
|
|
54
|
Load address: 0x80007fc0
|
|
55
|
Loading: #################################################################
|
|
56
|
#################################################################
|
|
57
|
#################################################################
|
|
58
|
#################################################################
|
|
59
|
#################################################################
|
|
60
|
#################################################################
|
|
61
|
#################################################################
|
|
62
|
#################################################################
|
|
63
|
#################################################################
|
|
64
|
########
|
|
65
|
1.7 MiB/s
|
|
66
|
done
|
|
67
|
Bytes transferred = 8704888 (84d378 hex)
|
|
68
|
Kernel image @ 0x80007fc0 [ 0x000000 - 0x84d378 ]
|
|
69
|
## Flattened Device Tree blob at 88000000
|
|
70
|
Booting using the fdt blob at 0x88000000
|
|
71
|
Using Device Tree in place at 88000000, end 88012f3a
|
|
72
|
|
|
73
|
Starting kernel ...
|
|
74
|
|
|
75
|
[ 0.000000] Booting Linux on physical CPU 0x0
|
|
76
|
[ 0.000000] Initializing cgroup subsys cpuset
|
|
77
|
[ 0.000000] Initializing cgroup subsys cpu
|
|
78
|
[ 0.000000] Initializing cgroup subsys cpuacct
|
|
79
|
[ 0.000000] Linux version 4.4.27 (jcormier@jcormier-desktop) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #3 SMP PREEMPT RT Fri Nov 4 10:44:40 EDT 2016
|
|
80
|
[ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
|
|
81
|
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
|
|
82
|
[ 0.000000] Machine model: Critical Link MitySOM-335x
|
|
83
|
[ 0.000000] cma: Reserved 48 MiB at 0x9c800000
|
|
84
|
[ 0.000000] Memory policy: Data cache writeback
|
|
85
|
[ 0.000000] CPU: All CPU(s) started in SVC mode.
|
|
86
|
[ 0.000000] AM335X ES2.1 (sgx neon )
|
|
87
|
[ 0.000000] PERCPU: Embedded 14 pages/cpu @df8fe000 s25792 r8192 d23360 u57344
|
|
88
|
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129408
|
|
89
|
[ 0.000000] Kernel command line: console=ttyO0,115200n8 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait ip=none
|
|
90
|
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
|
|
91
|
[ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
|
|
92
|
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
|
|
93
|
[ 0.000000] Memory: 449272K/522240K available (11517K kernel code, 940K rwdata, 3824K rodata, 704K init, 962K bss, 23816K reserved, 49152K cma-reserved, 0K highmem)
|
|
94
|
[ 0.000000] Virtual kernel memory layout:
|
|
95
|
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
|
|
96
|
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
|
|
97
|
[ 0.000000] vmalloc : 0xe0800000 - 0xff800000 ( 496 MB)
|
|
98
|
[ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
|
|
99
|
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
|
|
100
|
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
|
|
101
|
[ 0.000000] .text : 0xc0008000 - 0xc0f037c0 (15342 kB)
|
|
102
|
[ 0.000000] .init : 0xc0f04000 - 0xc0fb4000 ( 704 kB)
|
|
103
|
[ 0.000000] .data : 0xc0fb4000 - 0xc109f0e4 ( 941 kB)
|
|
104
|
[ 0.000000] .bss : 0xc10a2000 - 0xc1192960 ( 963 kB)
|
|
105
|
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
|
|
106
|
[ 0.000000] Preemptible hierarchical RCU implementation.
|
|
107
|
[ 0.000000] Build-time adjustment of leaf fanout to 32.
|
|
108
|
[ 0.000000] RCU restricting CPUs from NR_CPUS=2 to nr_cpu_ids=1.
|
|
109
|
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
|
|
110
|
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
|
|
111
|
[ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
|
|
112
|
[ 0.000000] OMAP clockevent source: timer2 at 24000000 Hz
|
|
113
|
[ 0.000018] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
|
|
114
|
[ 0.000034] clocksource: timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
|
|
115
|
[ 0.000044] OMAP clocksource: timer1 at 24000000 Hz
|
|
116
|
[ 0.001611] clocksource_probe: no matching clocksources found
|
|
117
|
[ 0.001851] Console: colour dummy device 80x30
|
|
118
|
[ 0.002068] WARNING: Your 'console=ttyO0' has been replaced by 'ttyS0'
|
|
119
|
[ 0.002072] This ensures that you still see kernel messages. Please
|
|
120
|
[ 0.002075] update your kernel commandline.
|
|
121
|
[ 0.050453] Calibrating delay loop... 795.64 BogoMIPS (lpj=1591296)
|
|
122
|
[ 0.050461] pid_max: default: 32768 minimum: 301
|
|
123
|
[ 0.050646] Security Framework initialized
|
|
124
|
[ 0.050656] Yama: becoming mindful.
|
|
125
|
[ 0.050698] AppArmor: AppArmor disabled by boot time parameter
|
|
126
|
[ 0.050913] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
127
|
[ 0.050924] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
|
|
128
|
[ 0.052079] Initializing cgroup subsys io
|
|
129
|
[ 0.052109] Initializing cgroup subsys memory
|
|
130
|
[ 0.052160] Initializing cgroup subsys devices
|
|
131
|
[ 0.052178] Initializing cgroup subsys freezer
|
|
132
|
[ 0.052194] Initializing cgroup subsys net_cls
|
|
133
|
[ 0.052208] Initializing cgroup subsys perf_event
|
|
134
|
[ 0.052224] Initializing cgroup subsys net_prio
|
|
135
|
[ 0.052252] Initializing cgroup subsys pids
|
|
136
|
[ 0.052396] CPU: Testing write buffer coherency: ok
|
|
137
|
[ 0.052407] ftrace: allocating 34417 entries in 101 pages
|
|
138
|
[ 0.181011] CPU0: thread -1, cpu 0, socket -1, mpidr 0
|
|
139
|
[ 0.181229] Setting up static identity map for 0x80008280 - 0x800082d8
|
|
140
|
[ 0.214595] Brought up 1 CPUs
|
|
141
|
[ 0.214629] SMP: Total of 1 processors activated (795.64 BogoMIPS).
|
|
142
|
[ 0.214643] CPU: All CPU(s) started in SVC mode.
|
|
143
|
[ 0.216677] devtmpfs: initialized
|
|
144
|
[ 0.258732] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
|
|
145
|
[ 0.293808] omap_hwmod: debugss: _wait_target_disable failed
|
|
146
|
[ 0.323775] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
|
|
147
|
[ 0.330740] xor: measuring software checksum speed
|
|
148
|
[ 0.370465] arm4regs : 974.000 MB/sec
|
|
149
|
[ 0.410447] 8regs : 764.000 MB/sec
|
|
150
|
[ 0.450445] 32regs : 870.000 MB/sec
|
|
151
|
[ 0.490445] neon : 1325.000 MB/sec
|
|
152
|
[ 0.490460] xor: using function: neon (1325.000 MB/sec)
|
|
153
|
[ 0.490513] pinctrl core: initialized pinctrl subsystem
|
|
154
|
[ 0.493479] NET: Registered protocol family 16
|
|
155
|
[ 0.499779] DMA: preallocated 256 KiB pool for atomic coherent allocations
|
|
156
|
[ 0.510535] cpuidle: using governor ladder
|
|
157
|
[ 0.522497] cpuidle: using governor menu
|
|
158
|
[ 0.531932] OMAP GPIO hardware version 0.1
|
|
159
|
[ 0.550200] omap-gpmc 50000000.gpmc: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/nandflash_pins_default, deferring probe
|
|
160
|
[ 0.554257] No ATAGs?
|
|
161
|
[ 0.554300] hw-breakpoint: debug architecture 0x4 unsupported.
|
|
162
|
[ 0.555325] omap4_sram_init:Unable to allocate sram needed to handle errata I688
|
|
163
|
[ 0.555354] omap4_sram_init:Unable to get sram pool needed to handle errata I688
|
|
164
|
[ 0.670537] raid6: int32x1 gen() 201 MB/s
|
|
165
|
[ 0.738532] raid6: int32x1 xor() 172 MB/s
|
|
166
|
[ 0.806479] raid6: int32x2 gen() 263 MB/s
|
|
167
|
[ 0.874515] raid6: int32x2 xor() 209 MB/s
|
|
168
|
[ 0.942660] raid6: int32x4 gen() 246 MB/s
|
|
169
|
[ 1.010539] raid6: int32x4 xor() 198 MB/s
|
|
170
|
[ 1.078548] raid6: int32x8 gen() 240 MB/s
|
|
171
|
[ 1.146554] raid6: int32x8 xor() 161 MB/s
|
|
172
|
[ 1.214489] raid6: neonx1 gen() 1162 MB/s
|
|
173
|
[ 1.282446] raid6: neonx1 xor() 673 MB/s
|
|
174
|
[ 1.350464] raid6: neonx2 gen() 1516 MB/s
|
|
175
|
[ 1.418467] raid6: neonx2 xor() 934 MB/s
|
|
176
|
[ 1.486483] raid6: neonx4 gen() 1570 MB/s
|
|
177
|
[ 1.554467] raid6: neonx4 xor() 965 MB/s
|
|
178
|
[ 1.622477] raid6: neonx8 gen() 876 MB/s
|
|
179
|
[ 1.690487] raid6: neonx8 xor() 636 MB/s
|
|
180
|
[ 1.690502] raid6: using algorithm neonx4 gen() 1570 MB/s
|
|
181
|
[ 1.690515] raid6: .... xor() 965 MB/s, rmw enabled
|
|
182
|
[ 1.690526] raid6: using intx1 recovery algorithm
|
|
183
|
[ 1.706843] edma 49000000.edma: TI EDMA DMA engine driver
|
|
184
|
[ 1.714594] SCSI subsystem initialized
|
|
185
|
[ 1.719195] usbcore: registered new interface driver usbfs
|
|
186
|
[ 1.719325] usbcore: registered new interface driver hub
|
|
187
|
[ 1.719497] usbcore: registered new device driver usb
|
|
188
|
[ 1.720457] omap_i2c 44e0b000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c0_pins, deferring probe
|
|
189
|
[ 1.720538] omap_i2c 4802a000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c1_pins, deferring probe
|
|
190
|
[ 1.720595] omap_i2c 4819c000.i2c: could not find pctldev for node /ocp/l4_wkup@44c00000/scm@210000/pinmux@800/pinmux_i2c2_pins, deferring probe
|
|
191
|
[ 1.720788] media: Linux media interface: v0.10
|
|
192
|
[ 1.720899] Linux video capture interface: v2.00
|
|
193
|
[ 1.721056] pps_core: LinuxPPS API ver. 1 registered
|
|
194
|
[ 1.721070] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
|
|
195
|
[ 1.721114] PTP clock support registered
|
|
196
|
[ 1.722709] omap-mailbox 480c8000.mailbox: omap mailbox rev 0x400
|
|
197
|
[ 1.728033] NetLabel: Initializing
|
|
198
|
[ 1.728061] NetLabel: domain hash size = 128
|
|
199
|
[ 1.728071] NetLabel: protocols = UNLABELED CIPSOv4
|
|
200
|
[ 1.728162] NetLabel: unlabeled traffic allowed by default
|
|
201
|
[ 1.728694] clocksource: Switched to clocksource timer1
|
|
202
|
[ 1.957882] NET: Registered protocol family 2
|
|
203
|
[ 1.959100] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
|
|
204
|
[ 1.959199] TCP bind hash table entries: 4096 (order: 4, 114688 bytes)
|
|
205
|
[ 1.959459] TCP: Hash tables configured (established 4096 bind 4096)
|
|
206
|
[ 1.959568] UDP hash table entries: 256 (order: 2, 16384 bytes)
|
|
207
|
[ 1.959624] UDP-Lite hash table entries: 256 (order: 2, 16384 bytes)
|
|
208
|
[ 1.960044] NET: Registered protocol family 1
|
|
209
|
[ 1.965124] RPC: Registered named UNIX socket transport module.
|
|
210
|
[ 1.965151] RPC: Registered udp transport module.
|
|
211
|
[ 1.965163] RPC: Registered tcp transport module.
|
|
212
|
[ 1.965174] RPC: Registered tcp NFSv4.1 backchannel transport module.
|
|
213
|
[ 1.966533] hw perfevents: enabled with armv7_cortex_a8 PMU driver, 5 counters available
|
|
214
|
[ 1.970835] futex hash table entries: 256 (order: 2, 16384 bytes)
|
|
215
|
[ 1.970992] audit: initializing netlink subsys (disabled)
|
|
216
|
[ 1.971099] audit: type=2000 audit(1.880:1): initialized
|
|
217
|
[ 1.993229] zbud: loaded
|
|
218
|
[ 1.994263] VFS: Disk quotas dquot_6.6.0
|
|
219
|
[ 1.994725] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
|
|
220
|
[ 2.003653] NFS: Registering the id_resolver key type
|
|
221
|
[ 2.003753] Key type id_resolver registered
|
|
222
|
[ 2.003767] Key type id_legacy registered
|
|
223
|
[ 2.003809] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
|
|
224
|
[ 2.004331] fuse init (API version 7.23)
|
|
225
|
[ 2.005540] SGI XFS with ACLs, security attributes, realtime, no debug enabled
|
|
226
|
[ 2.028432] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
|
|
227
|
[ 2.033099] io scheduler noop registered
|
|
228
|
[ 2.033130] io scheduler deadline registered
|
|
229
|
[ 2.033238] io scheduler cfq registered (default)
|
|
230
|
[ 2.035396] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
|
|
231
|
[ 2.039581] wkup_m3_ipc 44e11324.wkup_m3_ipc: could not get rproc handle
|
|
232
|
[ 2.042417] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled
|
|
233
|
[ 2.047758] 44e09000.serial: ttyS0 at MMIO 0x44e09000 (irq = 158, base_baud = 3000000) is a 8250
|
|
234
|
[ 2.949345] console [ttyS0] enabled
|
|
235
|
[ 2.954384] 481a6000.serial: ttyS3 at MMIO 0x481a6000 (irq = 159, base_baud = 3000000) is a 8250
|
|
236
|
[ 2.964851] 481a8000.serial: ttyS4 at MMIO 0x481a8000 (irq = 160, base_baud = 3000000) is a 8250
|
|
237
|
[ 2.975898] [drm] Initialized drm 1.1.0 20060810
|
|
238
|
[ 3.036693] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
|
|
239
|
[ 3.042850] davinci_mdio 4a101000.mdio: detected phy mask fffffffb
|
|
240
|
[ 3.054582] libphy: 4a101000.mdio: probed
|
|
241
|
[ 3.058757] davinci_mdio 4a101000.mdio: phy[2]: device 4a101000.mdio:02, driver Micrel KSZ9031 Gigabit PHY
|
|
242
|
[ 3.069866] cpsw 4a100000.ethernet: Detected MACID = d0:ff:50:22:b8:ab
|
|
243
|
[ 3.076885] cpsw 4a100000.ethernet: cpts: overflow check period 2125
|
|
244
|
[ 3.086117] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
|
|
245
|
[ 3.092768] ehci-platform: EHCI generic platform driver
|
|
246
|
[ 3.098373] ehci-omap: OMAP-EHCI Host Controller driver
|
|
247
|
[ 3.104371] usbcore: registered new interface driver usb-storage
|
|
248
|
[ 3.113607] 47401300.usb-phy supply vcc not found, using dummy regulator
|
|
249
|
[ 3.136289] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
|
|
250
|
[ 3.142129] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
|
|
251
|
[ 3.150484] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
|
|
252
|
[ 3.157321] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
253
|
[ 3.164585] usb usb1: Product: MUSB HDRC host driver
|
|
254
|
[ 3.169581] usb usb1: Manufacturer: Linux 4.4.27 musb-hcd
|
|
255
|
[ 3.175012] usb usb1: SerialNumber: musb-hdrc.0.auto
|
|
256
|
[ 3.181543] hub 1-0:1.0: USB hub found
|
|
257
|
[ 3.185485] hub 1-0:1.0: 1 port detected
|
|
258
|
[ 3.202344] 47401b00.usb-phy supply vcc not found, using dummy regulator
|
|
259
|
[ 3.224109] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
|
|
260
|
[ 3.229970] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
|
|
261
|
[ 3.238234] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
|
|
262
|
[ 3.245069] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
|
|
263
|
[ 3.252334] usb usb2: Product: MUSB HDRC host driver
|
|
264
|
[ 3.257330] usb usb2: Manufacturer: Linux 4.4.27 musb-hcd
|
|
265
|
[ 3.262762] usb usb2: SerialNumber: musb-hdrc.1.auto
|
|
266
|
[ 3.269328] hub 2-0:1.0: USB hub found
|
|
267
|
[ 3.273206] hub 2-0:1.0: 1 port detected
|
|
268
|
[ 3.303792] mousedev: PS/2 mouse device common for all mice
|
|
269
|
[ 3.312917] omap_rtc 44e3e000.rtc: already running
|
|
270
|
[ 3.318445] omap_rtc 44e3e000.rtc: rtc core: registered 44e3e000.rtc as rtc0
|
|
271
|
[ 3.327535] i2c /dev entries driver
|
|
272
|
[ 3.333692] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
|
|
273
|
[ 3.341403] cpuidle: enable-method property 'ti,am3352' found operations
|
|
274
|
[ 3.384933] hidraw: raw HID events driver (C) Jiri Kosina
|
|
275
|
[ 3.395182] usbcore: registered new interface driver usbhid
|
|
276
|
[ 3.400797] usbhid: USB HID core driver
|
|
277
|
[ 3.405127] ashmem: initialized
|
|
278
|
[ 3.410024] remoteproc0: wkup_m3 is available
|
|
279
|
[ 3.414514] remoteproc0: Note: remoteproc is still under development and considered experimental.
|
|
280
|
[ 3.423608] remoteproc0: THE BINARY FORMAT IS NOT YET FINALIZED, and backward compatibility isn't yet guaranteed.
|
|
281
|
[ 3.444303] NET: Registered protocol family 10
|
|
282
|
[ 3.449681] mmc0: host does not support reading read-only switch, assuming write-enable
|
|
283
|
[ 3.461887] mip6: Mobile IPv6
|
|
284
|
[ 3.464995] mmc0: new high speed SDHC card at address aaaa
|
|
285
|
[ 3.471611] NET: Registered protocol family 17
|
|
286
|
[ 3.476754] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
|
|
287
|
[ 3.482815] Key type dns_resolver registered
|
|
288
|
[ 3.483385] mmcblk0: p1 p2 p3
|
|
289
|
[ 3.493086] mpls_gso: MPLS GSO support
|
|
290
|
[ 3.497149] omap_voltage_late_init: Voltage driver support not added
|
|
291
|
[ 3.505451] PM: Cannot get wkup_m3_ipc handle
|
|
292
|
[ 3.510012] ThumbEE CPU extension supported.
|
|
293
|
[ 3.514349] Registering SWP/SWPB emulation handler
|
|
294
|
[ 3.520821] registered taskstats version 1
|
|
295
|
[ 3.525218] zswap: loaded using pool lzo/zbud
|
|
296
|
[ 3.539226] Btrfs loaded
|
|
297
|
[ 3.544444] Key type encrypted registered
|
|
298
|
[ 3.554481] omap-gpmc 50000000.gpmc: GPMC revision 6.0
|
|
299
|
[ 3.559833] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
|
|
300
|
[ 3.566844] omap-gpmc 50000000.gpmc: cannot request GPMC CS 0
|
|
301
|
[ 3.572766] omap-gpmc 50000000.gpmc: failed to probe DT children
|
|
302
|
[ 3.579280] omap-gpmc: probe of 50000000.gpmc failed with error -16
|
|
303
|
[ 3.587974] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
|
|
304
|
[ 3.595696] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 400 kHz
|
|
305
|
[ 3.617018] tps65910 2-002d: No interrupt support, no core IRQ
|
|
306
|
[ 3.653616] omap_i2c 4819c000.i2c: bus 2 rev0.11 at 400 kHz
|
|
307
|
[ 3.661226] vdd_mpu: supplied by vbat
|
|
308
|
[ 3.664742] remoteproc0: powering up wkup_m3
|
|
309
|
[ 3.664764] remoteproc0: Booting fw image am335x-pm-firmware.elf, size 217148
|
|
310
|
[ 3.665036] remoteproc0: remote processor wkup_m3 is now up
|
|
311
|
[ 3.665090] wkup_m3_ipc 44e11324.wkup_m3_ipc: CM3 Firmware Version = 0x192
|
|
312
|
[ 3.692325] PM: bootloader does not support rtc-only!
|
|
313
|
[ 3.698859] omap_rtc 44e3e000.rtc: setting system clock to 2016-07-15 01:08:47 UTC (1468544927)
|
|
314
|
[ 3.707736] of_cfs_init
|
|
315
|
[ 3.710413] of_cfs_init: OK
|
|
316
|
[ 3.728264] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
|
|
317
|
[ 3.762290] EXT4-fs (mmcblk0p2): recovery complete
|
|
318
|
[ 3.767165] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
|
|
319
|
[ 3.775398] VFS: Mounted root (ext3 filesystem) on device 179:2.
|
|
320
|
[ 3.790757] devtmpfs: mounted
|
|
321
|
[ 3.795496] Freeing unused kernel memory: 704K (c0f04000 - c0fb4000)
|
|
322
|
[ 3.799606] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_wait_vrise (80, <SessEnd), retry #3, port1 0008010c
|
|
323
|
INIT: version 2.88 booting
|
|
324
|
Error opening /dev/fb0: No such file or directory
|
|
325
|
Starting udev
|
|
326
|
[ 4.717137] udevd[135]: starting version 182
|
|
327
|
[ 5.131593] EXT4-fs (mmcblk0p2): re-mounted. Opts: data=ordered
|
|
328
|
Starting Bootlog daemon: bootlogd: cannot allocate pseudo tty: No such file or directory
|
|
329
|
bootlogd.
|
|
330
|
[ 5.632151] random: dd: uninitialized urandom read (512 bytes read, 24 bits of entropy available)
|
|
331
|
INIT: Entering runlevel: 5
|
|
332
|
Configuring network interfaces... [ 8.091684] net eth0: initializing cpsw version 1.12 (0)
|
|
333
|
[ 8.103741] net eth0: initialized cpsw ale version 1.4
|
|
334
|
|
|
335
|
udevadm settle - timeout of 3 seconds reached, the event queue c[ 8.120963] net eth0: ALE Table size 1024
|
|
336
|
ontains:
|
|
337
|
/sys/devices/platform/ocp/48060000.mmc/mmc_host/mmc0/mmc0:aaaa[ 8.134610] libphy: PHY 4a101000.mdio:01 not found
|
|
338
|
/block/mmcblk0 (1079)
|
|
339
|
/sys/devices/platform/ocp/48060000.mmc/[ 8.153594] net eth0: phy "4a101000.mdio:01" not found on slave 0, err -19
|
|
340
|
mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p1 (1080)
|
|
341
|
/sys/devices/platform/ocp/48060000.mmc/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p2 (1081)
|
|
342
|
/sys/devices/platform/ocp/48060000.mmc/mmc_host/mmc0/mmc0:aaaa/block/mmcblk0/mmcblk0p3 (1082)
|
|
343
|
/sys/devices/platform/ocp/49800000.tptc (1189)
|
|
344
|
/sys/devices/platform/ocp/49900000.tptc (1190)
|
|
345
|
/sys/devices/platform/ocp/49a00000.tptc (1191)
|
|
346
|
/sys/devices/platform/ocp/4a100000.ethernet (1192)
|
|
347
|
/sys/devices/platform/ocp/4a100000.ethernet/44e10650.cpsw-phy-sel (1193)
|
|
348
|
/sys/devices/platform/ocp/4a100000.ethernet/4a101000.mdio (1194)
|
|
349
|
/sys/devices/platform/ocp/4a100000.ethernet/4a101000.mdio/mdio_bus/4a101000.mdio (1195)
|
|
350
|
/sys/devices/platform/ocp/4a100000.ethernet/4a101000.mdio/mdio_bus/4a101000.mdio/4a101000.mdio:02 (1196)
|
|
351
|
/sys/devices/platform/ocp/4a100000.ethernet/net/eth0 (1197)
|
|
352
|
/sys/devices/platform/ocp/4c000000[ 8.246465] net eth0: phy found : id is : 0x221622
|
|
353
|
.emif (1198)
|
|
354
|
/sys/devices/platform/ocp/50000000.gpmc (1199)
|
|
355
|
/sys/devices/platform/ocp/53100000.sham (1200)
|
|
356
|
/sys/devices[ 8.271946] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
|
|
357
|
/platform/ocp/53500000.aes (1201)
|
|
358
|
|
|
359
|
done.
|
|
360
|
Starting system message bus: [ 8.947232] random: dbus-daemon: uninitialized urandom read (12 bytes read, 35 bits of entropy available)
|
|
361
|
[ 8.993876] random: dbus-daemon: uninitialized urandom read (12 bytes read, 35 bits of entropy available)
|
|
362
|
dbus.
|
|
363
|
Starting Dropbear SSH server: [ 9.211976] random: dropbear: uninitialized urandom read (32 bytes read, 38 bits of entropy available)
|
|
364
|
dropbear.
|
|
365
|
Starting rpcbind daemon...done.
|
|
366
|
creating NFS state directory: done
|
|
367
|
starting statd: done
|
|
368
|
NFS daemon support not enabled in kernel
|
|
369
|
Starting ntpd: done
|
|
370
|
Starting syslogd/klogd: done
|
|
371
|
* Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon
|
|
372
|
[ 10.641612] random: avahi-daemon: uninitialized urandom read (4 bytes read, 49 bits of entropy available)
|
|
373
|
[ 10.694084] random: avahi-daemon: uninitialized urandom read (4 bytes read, 49 bits of entropy available) [ ok ]
|
|
374
|
[ 11.049576] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
|
|
375
|
[ 11.137483] EXT4-fs (mmcblk0p3): recovery complete
|
|
376
|
[ 11.161524] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
|
|
377
|
Starting qtdemo
|
|
378
|
Stopping Bootlog daemon: bootlogd.
|
|
379
|
|
|
380
|
|
|
381
|
,--. ,--.,--. ,--. ,---. ,-----. ,--. ,--.
|
|
382
|
| `.' |`--',-' '-.,--. ,--.' .-' ' .-. '| `.' |
|
|
383
|
| |'.'| |,--.'-. .-' \ ' / `. `-. | | | || |'.'| |
|
|
384
|
| | | || | | | \ ' .-' |' '-' '| | | |
|
|
385
|
`--' `--'`--' `--' .-' / `-----' `-----' `--' `--'
|
|
386
|
`---'
|
|
387
|
,----. ,----. ,-----.,--. ,--.
|
|
388
|
'.-. |'.-. || .--' \ `.' /
|
|
389
|
.' < .' < '--. `\ .' \
|
|
390
|
/'-' |/'-' |.--' / / .'. \
|
|
391
|
`----' `----' `----' '--' '--'
|
|
392
|
|
|
393
|
Critical Link LLC http://support.criticallink.com mitysom-335x /dev/ttyO0
|
|
394
|
Linux kernel verison Linux armv7l #3 SMP PREEMPT RT Fri Nov 4 10:44:40 EDT 2016
|
|
395
|
|
|
396
|
Critical Link Linux (sysvinit) 1.6.0 mitysom-335x /dev/ttyO0
|
|
397
|
|
|
398
|
mitysom-335x login: QScreenLinuxFb::connect: No such file or directory
|
|
399
|
Error opening framebuffer device /dev/fb0
|
|
400
|
QScreenLinuxFb::connect: No such file or directory
|
|
401
|
Error opening framebuffer device /dev/fb0
|
|
402
|
|
