Project

General

Profile

Download (827 Bytes)

fw_printenv not working ยป fw_env.config

Srinivasa Wunnimani, 12/20/2019 10:10 AM

 
# Configuration file for fw_(printenv/setenv) utility.
# Up to two entries are valid, in this case the redundant
# environment sector is assumed present.
# Notice, that the "Number of sectors" is ignored on NOR and SPI-dataflash.
# Futhermore, if the Flash sector size is ommitted, this value is assumed to
# be the same as the Environment size, which is valid for NOR and SPI-dataflash

# NOR example
# MTD device name Device offset Env. size Flash sector size Number of sectors
#/dev/mtd1 0x00000 0x20000 0x20000
#/dev/mtd2 0x0000 0x4000 0x4000

# MTD SPI-dataflash example
# MTD device name Device offset Env. size Flash sector size Number of sectors
#/dev/mtd5 0x4200 0x4200
#/dev/mtd6 0x4200 0x4200

# NAND example
/dev/mtd6 0x00000 0x20000 0x20000 1

# Block device example
#/dev/mmcblk0 0xc0000 0x20000
    (1-1/1)
    Go to top