Project

General

Profile

Compiling the HelloWorld application with CGT

Added by Prashant Dabholkar almost 11 years ago

Hi,

I was trying to compile the DSP HelloWorld Application available at the following location. http://support.criticallink.com/redmine/projects/arm9-platforms/wiki/DSP_Hello_World. I got both the ARM side and the DSP side files to compile after much effort. However when I load the binaries onto the target and launch the application, it does not work. I get the following message on my console.

Loading file HelloWorldDSP.out
Msgq <debug> open: 0x00008000
PROC Load successful
BUG: soft lockup - CPU#0 stuck for 61s! [HelloWorld:1199]
Modules linked in: dsplinkk

Pid: 1199, comm:           HelloWorld
CPU: 0    Not tainted  (2.6.34-rc1-14815-g0e16b7d #6)
PC is at SHMDRV_handshake+0x8c/0xb8 [dsplinkk]
LR is at LDRV_DRV_handshake+0xd4/0x294 [dsplinkk]
pc : [<bf00218c>]    lr : [<bf001890>]    psr: 60000013
sp : c5f8fe50  ip : 80008017  fp : beac1b0c
r10: bf015510  r9 : c5f8e000  r8 : 00000002
r7 : 00000000  r6 : baba01ff  r5 : c688e000  r4 : c69c0100
r3 : 00000000  r2 : 102ea4bc  r1 : 00000000  r0 : 00008000
Flags: nZCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
Control: 0005317f  Table: c5078000  DAC: 00000015
BUG: soft lockup - CPU#0 stuck for 61s! [HelloWorld:1199]
Modules linked in: dsplinkk

Pid: 1199, comm:           HelloWorld
CPU: 0    Not tainted  (2.6.34-rc1-14815-g0e16b7d #6)
PC is at SHMDRV_handshake+0x8c/0xb8 [dsplinkk]
LR is at LDRV_DRV_handshake
.
.
.

the same message keeps repeating and the board does not respond

I am using the following versions of tools
CGT : TI_CGT_C6000_7.4.5 (downloaded from the TI website and installed)
DSP BIOS : bios_5_42_01_09 (downloaded from the TI website and installed separately)
MDK : MDK_2011-03-31 (downloaded from the files section of this website)
EDMA3 : edma3_lld_01_10_00_01 (downloaded from the TI website and installed on Windows. Then I copied the libraries folders to my Virtual box)

I am using a makefile to compile my code (both ARM and DSP side).

Now the interesting part is as follows.
If I use CCS5.5 to compile the DSP side code, as instructed on http://support.criticallink.com/redmine/projects/arm9-platforms/wiki/DSP_Hello_World , then the application runs successfully. I am at a loss to understand what tools/libraries am I using incorrectly.

Anybody out there who has faced this issue?


Replies (2)

RE: Compiling the HelloWorld application with CGT - Added by Michael Williamson almost 11 years ago

You should dump out the full build texts between the two operations and compare.

I suspect that the memory configuration templates (which define the shared regions for DSPLINK) are somehow not the same between the 2 builds.

-Mike

RE: Compiling the HelloWorld application with CGT - Added by Prashant Dabholkar almost 11 years ago

Thanks Mike,

I will try that out. However for the time being, I am continuing with CCS on Windows. :)

Regards
Prashant

    (1-2/2)
    Go to top
    Add picture from clipboard (Maximum size: 1 GB)