Project

General

Profile

Activity

From 11/08/2012 to 12/07/2012

12/06/2012

01:51 PM Software Development: RE: Linux DaVinci Video Port Interface (VPIF)
My OMAP-L138 VPIF issue has been resolved! There was a conflict with PINMUX16 and PINMUX17 control register settings... Terrence Lawrence
12:25 PM Software Development: RE: Extremely slow root file system
Thanks Mike for answer.
I forwarded your last comment to our HW engineer.
Chances are I will not get other que...
François Tremblay
09:23 AM Software Development: RE: Extremely slow root file system
The approach by your HW designer is fine.
Tri-stating the unused lines that are connected to the EMIFA and IRQ l...
Michael Williamson
09:13 AM Software Development: RE: Extremely slow root file system
Mike,
The unused I/O pins in our FPGA design seems to be the culprit.
Here a comment from our hardware engineer...
François Tremblay

12/05/2012

03:22 PM Software Development: RE: Extremely slow root file system
Please make sure that any unused IO pins on your FPGA design are "floating" and not "pulled-down" in the bitstream ge... Michael Williamson
01:54 PM Software Development: Extremely slow root file system
Hardware configuration: Industrial IO board + L138-DI-225-RI
We have a FPGA application that transmit data to DSP ...
François Tremblay
10:49 AM FPGA Development: RE: I2C issues on SLX45
I dropped the drive strength to 6 on the SCL and SDA lines and it makes a slight difference - not so much ground boun... Conor O
07:20 AM FPGA Development: RE: I2C issues on SLX45
(Busy writing reports instead of doing the work the reports are about!)
For drive strength I was using the Xilinx ...
Conor O

12/04/2012

11:29 AM Software Development: RE: Linux DaVinci Video Port Interface (VPIF)
Hi Terrence,
Sorry for the confusion. The linux kernels 2.6.X tracked TI's Platform Support Package releases from...
Michael Williamson
09:55 AM Software Development: RE: Linux DaVinci Video Port Interface (VPIF)
I am currently using MDK_2011-12-05 DaVinici Linux kernel to support VPIF on a OMAP-L138F SoM platform. I attempted ... Terrence Lawrence
08:36 AM Software Development: Linux DaVinci Video Port Interface (VPIF)
I need to setup a VPIF interface (ala V4L2) using a Mity OMAP-L138F SoM platform running DaVinci Linux to support, BT... Terrence Lawrence
07:12 AM FPGA Development: RE: I2C issues on SLX45
Hi Conor,
What are you using for drive strength on the FPGA? You might be able to lower the drive strength if the...
Michael Williamson
05:50 AM FPGA Development: RE: I2C issues on SLX45
Hi again. It looks like the fpga is doing the right thing but the rise times are just too slow. Er. I guess that's my... Conor O

12/03/2012

10:26 AM FPGA Development: RE: I2C issues on SLX45
Oh and 5K pull ups are to 3.3V on pin J701.38. SDA/SCL read 3.3V, at least on power on they do... Conor O
10:14 AM FPGA Development: RE: I2C issues on SLX45
Thanks Mike. Sure it was evident the generics shouldn't be there and if they are it won't synthesise so it's not much... Conor O
07:14 AM FPGA Development: RE: I2C issues on SLX45
Hello Conor,
For the I2C, you are correct, the generics in the TOP were a carry over from a previous port -- shoul...
Michael Williamson
06:09 AM FPGA Development: I2C issues on SLX45
Just one or two questions on the I2C ngc module. The industrialio_top.vhd example code uses a generic map to set cloc... Conor O
08:31 AM Software Development: RE: Using RAM as temporary storage
The 128 MB of Memory is total system memory. Some of it is used for the kernel and application space, but typically ... Michael Williamson
04:23 AM FPGA Development: RE: Pinout on L138-FG-225-RC
Thank you Mike!
Another question: I see that you provide Bank 0 and Bank 1 of the FPGA on the SO-DIMM socket.
Am ...
Michele Canepa

12/02/2012

02:59 PM FPGA Development: RE: Pinout on L138-FG-225-RC
Hi Michele,
There is no issue if you are using 6SLX16 FPGAs in any module configuration.
This only a problem wi...
Michael Williamson
02:53 PM FPGA Development: RE: Pinout on L138-FG-225-RC
Hello Tom,
the issue is (or was) on the datasheet of the SOM MityDSP
http://www.mitydsp.com/images/upload/File/...
Michele Canepa
02:24 PM FPGA Development: RE: Pinout on L138-FG-225-RC
Michele -
Can I ask for a reminder of what that issue is or a pointer to a forum post? I'm unable to locate it at...
Thomas Catalino
11:43 AM FPGA Development: Pinout on L138-FG-225-RC
Hello All,
to be sure about the pinout of the SOM L138-FG-225-RC using the FPGA 6SLX16 , I ask if you fixed the issu...
Michele Canepa

11/30/2012

10:18 PM Software Development: Using RAM as temporary storage
Posting on behalf of a customer:
Customer wants to store data to the SD card but believes they will be bursting mo...
Alexander Block

11/29/2012

05:34 PM FPGA Development: RE: Xilinx design suite 14.2 and MDK_2012-08-10
I found the solution!:) jean-pierre bétend-bon
01:45 PM Software Development: tftp access violation
We've been using an OMAP-L138F SOM that has exhibited no problems until we re-flashed the section containing FPGA bin... Wade Calcutt
11:16 AM Software Development: RE: Cannot Toggle GPIO pin
Thanks for your speedy reply. I'm using 3.2 from the 2012-08-10 MDK. Spencer Mayott
11:14 AM Software Development: RE: Cannot Toggle GPIO pin
Hi Spencer,
The issue is that the MCASP (see baseboard-industrialio.c) setup is configuring that pin to be in AFSR...
Michael Williamson
11:04 AM Software Development: RE: Cannot Toggle GPIO pin
Some funky formatting happened with the gpio name. Just for clarification its GPIO 0_13. Spencer Mayott
11:00 AM Software Development: Cannot Toggle GPIO pin
I'm running a MitydspL138 on the Industrial IO board, and I'm trying to set GPIO[0]_13 via echoing directions and val... Spencer Mayott
09:39 AM Software Development: RE: Problems building a rootfile system
Mike,
You are right - it was a config problem. By comparing the config you attached with the default "industial io...
Mads Olav le Maire

11/28/2012

01:51 PM Software Development: RE: Problems building a rootfile system
Thanks for the information.
We have at least one active customer using the 3.2 kernel on an Industrial-IO board wi...
Michael Williamson
05:30 AM Software Development: RE: Problems building a rootfile system
Hi,
Mike, thanks for your clarification.
I have two sata disks, one SSD which is sata-II (3.0gb) and one old m...
Mads Olav le Maire

11/27/2012

04:30 PM FPGA Development: Xilinx design suite 14.2 and MDK_2012-08-10
Hi all,
I am beginner with FPGA programming and want to develop a simple project on my MityDSP-l138F, involving only...
jean-pierre bétend-bon
10:39 AM Software Development: RE: Problems building a rootfile system
Hello,
I'm fairly certain that TI submitted the ahci-ti.c stuff originally in their PSP into the mainline and it g...
Michael Williamson
09:38 AM Software Development: RE: Problems building a rootfile system
Hi,
Just compared the drivers/ata for kernel version 2.6.34 and 3.2. It seems obvious that the 3.2 branch is lacki...
Mads Olav le Maire

11/26/2012

05:17 PM Software Development: RE: helloworld dsplink example
Do not get a chance to exit the application.
here is the log:
root@mityomapl138:/#
root@mityomapl138:/#
roo...
Krishna Vallabhaneni
02:49 PM Software Development: Building openembedded-core from scratch : MityDSP overlay breaks meta-toolchain-qte
Hi,
Is there a fix yet for the broken build system?
Would it not be possible to move the open parts to a publi...
Phil Sanderson

11/25/2012

02:34 PM Software Development: RE: GPIO Interrupt: request_irq() returning error: EINVAL
Hi Mike,
You were correct - I had failed to use the gpio_to_irq() function.
It all works sweet now!
Thanks for you...
Keith Fletcher

11/24/2012

07:59 PM Software Development: RE: helloworld dsplink example
Are you exiting the application by hitting 'q'?
-Mike
Michael Williamson
07:47 PM Software Development: helloworld dsplink example
in Helloworld dsp link example, get follwing aserts! why?
root@mityomapl138:/# ./HellWorldARM HellWorldDSP.out
Lo...
Krishna Vallabhaneni
03:46 PM Software Development: RE: dsplinkk.ko compatibility
There should be a dsplinkk.ko file in the /lib/modules/3.2.0/ directory in the reference filesystems. See http://sup... Michael Williamson

11/23/2012

07:08 PM Software Development: dsplinkk.ko compatibility
The MityDSP board has installed Linux kernel v 3.2.0. This was required for compatibilty with g_ether.ko driver for e... Krishna Vallabhaneni

11/22/2012

09:02 AM Software Development: RE: Problems building a rootfile system
Hello,
We've actually seen this issue on both kernels, and in general have traced the issue back to an Errata on t...
Michael Williamson
03:35 AM Software Development: RE: Problems building a rootfile system
Hello,
I have decided to use the Yocto framework for building my rootfs. Together with the 3.2 kernel compiled fro...
Mads Olav le Maire
08:43 AM Software Development: RE: GPIO Interrupt: request_irq() returning error: EINVAL
I am assuming you are writing kernel code or a kernel module?
Can you send a snippet of the code?
The GPIO inte...
Michael Williamson

11/20/2012

10:52 PM Software Development: GPIO Interrupt: request_irq() returning error: EINVAL
Hi,
I have attempted to configure a digital io, from bank0, as an interrupt, using the AINTC. However, when I attemp...
Keith Fletcher
05:57 PM Software Development: RE: Quick check of TLK100 ethernet PHY with U-boot
Hi Emmett,
Can you do a "config" command on both modules and confirm that the "EMAC configuration":http://support....
Michael Williamson
04:54 PM Software Development: RE: Quick check of TLK100 ethernet PHY with U-boot
We have 2 AM1808F SOM boards.
We realized that with the newer one, U-Boot does detect the TLK100PHP PHY.
The older ...
Emmett Bradford
05:52 PM Software Development: RE: Mity DSP-L138 Development board - 3 UARTS needed for final design?
I am assuming you are not using a MityDSP-L138F (with FPGA), right? If you do, I would simply put a UART into the FP... Michael Williamson

11/19/2012

11:05 AM Software Development: RE: Power management in Linux on MityDSP-l138F
Hello,
We have been able to put the L-138 into DEEPSLEEP mode (using the RTC to wake up the device). This was tes...
Michael Williamson

11/16/2012

03:19 PM Software Development: Quick check of TLK100 ethernet PHY with U-boot
I would like to verify communication with the TLK100PHP ethernet PHY using U-boot.
I have the identical circuit on m...
Emmett Bradford
04:32 AM Software Development: Power management in Linux on MityDSP-l138F
Hi all,
I would like to know whether there has been any effort to put the L-138 in DEEPSLEEP.
In that case I would...
jean-pierre bétend-bon

11/15/2012

10:40 AM Software Development: Mity DSP-L138 Development board - 3 UARTS needed for final design?
We are currently using your Mity DSP-L138 development board for software development until our own mother board is re... Angela Newman

11/13/2012

08:09 PM Software Development: RE: Ethernet over usb
Need help with the Linux kernel:
Generated the usb gadget, but cannot install it.
mitydsp@mitydsp-dev:~/workspace...
Krishna Vallabhaneni

11/09/2012

01:57 PM Software Development: RE: How to change the pinmux
Spencer
u-boot does the initial pinmux setup, look in board/davinci/mityomapl138/mityomapl138.c
The kernel then se...
Tim Iskander
01:50 PM Software Development: How to change the pinmux
I am working with a MityDSP L138 on a custom baseboard, and am having trouble figuring out how to modify the pinmux s... Spencer Mayott
01:50 PM Software Development: RE: Remote Debugging Hello DSP
Almost there ... I still have an issue.
John Pruitt said:
The error code 0x80008050 indicates that the connection...
Mary Frantz
10:32 AM Software Development: RE: Remote Debugging Hello DSP
Yes, I can run from the command line twice.
One problem: I needed to put the full path name for the DSP executable...
Mary Frantz

11/08/2012

08:28 PM Software Development: RE: Ethernet over usb
Succussfully generated and installed g_ether.ko on the mitydsp board, and configured the usb0 withe an ip adrees. Tha... Krishna Vallabhaneni
01:35 PM Software Development: RE: Ethernet over usb
The only way to get an invalid module format is if the kernel and modules aren't build from the same source / configu... Michael Williamson
01:45 PM Software Development: RE: How to build cmemk.ko
Thanks!
I found the cmemk.ko module in the the /lib/modules/3.2.0/extra/ folder along with dsplinkk.ko and others....
Mary Frantz
12:50 PM Software Development: RE: How to build cmemk.ko
The base and full filesystems in the MDK_2012-08-10 (MD_2012-08-10/fs/*.tgz) each have a cmemk.ko module located in t... Michael Williamson
12:36 PM Software Development: How to build cmemk.ko
I need to use the CMEM utility, but there is no cmemk.ko file. I am trying to build it, but can't find any instructi... Mary Frantz
01:23 PM Software Development: RE: CLK frequency increase using DSP only
OK.
The u-Boot / I2C commands to push the core voltage up to 1.3 volts, required for running at 456 MHz are as fol...
Michael Williamson
12:55 PM Software Development: RE: Problems building a rootfile system
Hi Mads,
We are actually considering moving all of our SOM linux capable products to Yocto (which is pretty close ...
Michael Williamson
08:05 AM Software Development: Problems building a rootfile system
I would like to build my own rootfile system for the mityarm 1808 dev kit. So far I have only succeeded with builds f... Mads Olav le Maire
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)