Project

General

Profile

Activity

From 01/12/2013 to 02/10/2013

02/08/2013

12:19 AM Software Development: RE: Supply voltage for RVDD (internal ram supply)
Hi Mike,
Thanks for the information and for the hint/link to the errata sheet.
Stéphane
Stéphane Peter

02/07/2013

07:01 AM Software Development: RE: Supply voltage for RVDD (internal ram supply)
RVDD is connected to the CORE voltage.
So when you run at 456 MHz, the RVDD is bumped up to 1.3 volts as well.
...
Michael Williamson
05:57 AM Software Development: Supply voltage for RVDD (internal ram supply)
Hello,
In the OMAP-L138 data sheet (sprs586d) chapter 2.8.27, I see that RVDD (internal ram supply) needs 1.2V respe...
Stéphane Peter
06:36 AM Software Development: Ethernet packet loss
Hello,
We are using the OMAP-L138 with SysBios on both ARM and DSP. In a test where we are sending nonsense data fro...
Stéphane Peter

02/04/2013

10:48 AM Software Development: RE: Linux boot time on the MityArm1808F
See this link for an example of loading the fpga image from uboot.
http://support.criticallink.com/redmine/projects/...
Jonathan Cormier

02/02/2013

08:28 AM Software Development: RE: Linux boot time on the MityArm1808F
Thank you for quick response.
It seems that StarterWare is a feasible option.
If I understand correctly, Start...
Alex Kucherov
06:43 AM Software Development: RE: Linux boot time on the MityArm1808F
Hello Alex,
We have not tried to much to get the boot times down to the levels that you are requiring. Keep in mi...
Michael Williamson
06:19 AM Software Development: RE: Linux boot time on the MityArm1808F
English is not my first language so please +BEAR+ with me. :) Alex Kucherov
06:03 AM Software Development: Linux boot time on the MityArm1808F
Hello,
I'm new to ARM software development so please bare with me.
+Some background on the project:+
I'm wor...
Alex Kucherov

01/29/2013

11:20 AM Software Development: RE: TFTP (or FTP) Server
If you really must have ftp, you can recompile "busybox":http://www.busybox.net/ (this is installed currently, but th... Michael Williamson
10:56 AM Software Development: RE: TFTP (or FTP) Server
Based on Jonathan's comment, it appears that ftp is not supported on this platform. Guess it'll have to be sftp.
...
Mary Frantz
10:48 AM Software Development: RE: TFTP (or FTP) Server
This error:... Michael Williamson
10:40 AM Software Development: RE: TFTP (or FTP) Server
Reading the online page for owftpd doesn't lead me to believe that the owftpd program is a network ftp server. It se... Jonathan Cormier
10:37 AM Software Development: RE: TFTP (or FTP) Server
Ran the following:
root@mityomapl138:/etc# echo nameserver 8.8.8.8 > resolv.conf
root@mityomapl138:/etc# opkg upd...
Mary Frantz
10:17 AM Software Development: RE: TFTP (or FTP) Server
That looks like either
1 - Your board is not able to see the internet
2 - You don't have a nameserver configured.
...
Tim Iskander
10:11 AM Software Development: RE: TFTP (or FTP) Server
Ok, tried that ... here's the results. I don't think the update worked.
root@mityomapl138:/etc/init.d# opkg updat...
Mary Frantz
10:04 AM Software Development: RE: TFTP (or FTP) Server
Try running
opkg update
This will ask the update server for a new list of packages and then you can rerun the op...
Jonathan Cormier
09:54 AM Software Development: RE: TFTP (or FTP) Server
Running
root@mityomapl138:/etc/init.d# opkg list | grep ftpd
yielded no results.
Running
root@mityomapl138:/etc...
Mary Frantz

01/28/2013

01:37 PM Software Development: RE: TFTP (or FTP) Server
Alternatively you could install and setup one of the ftp/tftp servers on your embedded device.
$opkg list | grep f...
Jonathan Cormier
01:10 PM Software Development: RE: TFTP (or FTP) Server
http://stackoverflow.com/questions/3477471/whats-a-decent-sftp-command-line-client-for-windows
SFTP/SCP is automat...
Jonathan Cormier

01/21/2013

07:30 AM Software Development: RE: Ethernet gadget - unable to connect to host PC
Hi,
There are two labels attached:
one says: 110264
the other: 80-000268RI-2 A
Seens to be something wi...
Mads Olav le Maire
07:18 AM Software Development: RE: Ethernet gadget - unable to connect to host PC
Hello Mads,
Sorry for the delay. Can you please post the part number for your board? On some of our older boards...
Michael Williamson
07:22 AM PCB Development: RE: Voltagelevel for EMA (PowerGroup B - DVDD3318_B)
The EMIFA pins (PowerGroup B) are configured as 3.3V for all configurations of the MityDSP-L138 and MityARM-18XX fami... Michael Williamson
07:20 AM Software Development: RE: Profibus Matser development on the Profibus DevKit
Hi Jeremy,
We have not done anything here with Profibus Master on the AM1810. TI provides a 3rd party vendor for ...
Michael Williamson

01/17/2013

11:36 AM FPGA Development: RE: Creating FPGA Base-Project - core manager problem
Hi Christian,
We do not currently distribute the vhdl for the MDK cores that are missing from that project. We do,...
Gregory Gluszek
11:05 AM Software Development: RE: TFTP (or FTP) Server
Yes, I have used that.
We are developing an embedded product. Our application code will run from startup. It will ...
Mary Frantz
10:50 AM Software Development: RE: TFTP (or FTP) Server
Normally, we use scp to transfer files to a remote server on the ARM.
You can configure ssh keys to allow transfer...
Michael Williamson
10:04 AM Software Development: TFTP (or FTP) Server
How do you start a tftp (or ftp) server on the ARM? Or how do you transfer files to a remote server programmatically?... Mary Frantz
11:03 AM Software Development: RE: Bootcmd break
That is exactly what I need. Thanks Mike. Tim Eastham
11:01 AM Software Development: RE: Bootcmd break
Tim,
Just hit a key and break and load the code manually?
If you want the FPGA to be loaded, then we often make...
Michael Williamson
10:51 AM Software Development: Bootcmd break
I am presently storing the firmware in non-volatile memory when I hand it off for testing. The problem is, sometimes... Tim Eastham

01/16/2013

04:33 AM Software Development: RE: How Can I use UART0 & UART2 in MityDSP-L138F?
jong sung choi wrote:
> hi mike. thank you but
> I just did you notice to me "Network configuration" article.
> It...
jong sung choi
04:32 AM Software Development: RE: How Can I use UART0 & UART2 in MityDSP-L138F?
hi mike. thank you but
I just did you notice to me "Network configuration" article.
It can changed Ethernet config ...
jong sung choi

01/15/2013

07:14 AM Software Development: RE: How Can I use UART0 & UART2 in MityDSP-L138F?
You should be able to disable the ethernet device by setting the ethernet configuration in u-Boot to indicate no ethe... Michael Williamson
01:07 AM Software Development: How Can I use UART0 & UART2 in MityDSP-L138F?
Hi I'm currently using your MityDSP-L138F SOM with custom baseboard which I designed.
In Our Baseboard UART0(pin 81 ...
jong sung choi
06:48 AM Software Development: Ethernet gadget - unable to connect to host PC
Hi,
I have problems connecting to the industial IO/AM1808 card using device USB. I have built the kernel and the e...
Mads Olav le Maire
04:12 AM Software Development: RE: AM1808-industrilal I/O performance
Thanks,
Missed that one - it's working.
Mads-l
Mads Olav le Maire

01/14/2013

03:46 PM FPGA Development: RE: Creating FPGA Base-Project - core manager problem
Hi Greg,
i opend the "build_lcd_rev_c" example project and migrate it to the 14.4 version. I think the migrtion wo...
Christian Rückl

01/13/2013

09:39 PM Software Development: RE: Debugging DSP in VirtualBox?
I have being using SD XDS510 USB + VirtualBox 4.1.16 + CCS 5.2.0 with no problems. Dmitry Gorulko
05:07 PM FPGA Development: RE: Creating FPGA Base-Project - core manager problem
Hi Christian,
The ISE Webpack license should be sufficient for what you are trying to do.
Try opening one of ...
Gregory Gluszek

01/12/2013

02:23 PM FPGA Development: Creating FPGA Base-Project - core manager problem
Hi,
I've started with the FPGA-design in ISE Webpack 14.4.
I added all files from "MDK_2012-08-10\fpga\vhdl" to ...
Christian Rückl
02:11 PM Software Development: RE: DSP Link example not working
Mike,
I got it and it's working now :)
Thanks.
Christian
Christian Rückl
02:10 PM Software Development: RE: u-Boot configuration for DSP-Startup
Tim,
It's working now.
Thanks!
Christian
Christian Rückl
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)