Project

General

Profile

Activity

From 03/14/2013 to 04/12/2013

04/11/2013

01:57 PM Software Development: RE: SATA not recognized
I don't think you will need to rebuild DSPLINK or CMEM.
You should be able to take the myconfig and copy it to the...
Michael Williamson
01:36 PM Software Development: RE: SATA not recognized
What's the best way to do that and change only that one feature?
I generated a config file from my kernel with the...
Mary Frantz
11:54 AM Software Development: RE: SATA not recognized
You need SATA_AHCI_PLATFORM set. You will need to rebuild the kernel.
-Mike
Michael Williamson
11:42 AM Software Development: RE: SATA not recognized
Here's the result:... Mary Frantz
11:36 AM Software Development: RE: SATA not recognized
Mary,
You can print the kernel config file by running:
_zcat /proc/config.gz _
You can then search the outpu...
Jonathan Cormier
11:24 AM Software Development: RE: SATA not recognized
My colleague has another SATA drive and MityDSP board. He reports as follows:
"The drive comes up fine in Windows...
Mary Frantz
10:51 AM Software Development: RE: SATA not recognized
Mary,
There should be no reason that the drive isn't detected by Windows XP when using a USB to Sata adapter. Ass...
Jonathan Cormier
09:20 AM Software Development: RE: SATA not recognized
I have tried the same SATA drive on a second MityDSP board as well as an older SATA drive. There are no "ata" messag... Mary Frantz

04/10/2013

09:50 PM Software Development: Open Embedded build error
Hi,
I've followed the instructions on http://support.criticallink.com/redmine/projects/arm9-platforms/wiki/Install...
Joel Seidman

04/09/2013

02:02 PM Software Development: RE: GPIO interrupt in MityOMAP-L138F
Hi Mike,
thanks for fast reply!
The best would be an example using an fpga gpio pin and an omap pin, just to tes...
Michele Canepa

04/08/2013

01:07 PM Software Development: RE: GPIO interrupt in MityOMAP-L138F
Are you trying to use a FPGA GPIO or an OMAP-L138 GPIO?
The DspGpio.h class should provide access to the OMAP-L138...
Michael Williamson
11:36 AM Software Development: GPIO interrupt in MityOMAP-L138F
Hello all,
I need to hook a HWI to a GPIO pin in a DSP application.
I have some questions:
1- Do your core libra...
Michele Canepa
12:49 PM Software Development: RE: L138 - DSP Timer interrupt question ...
Mike,
Thanks for information. Always very intressting. I am reading the Day2_AM training document.
Here our cu...
François Tremblay
12:58 AM Software Development: Start Guide : Cannot build helloworld application with eclipse
Hello,
I am using Virtual Box and MityDSP-L138_SDK_2012_06_13.eva image.
When I following Start Guide instruction ...
minh tung

04/07/2013

07:53 AM Software Development: RE: L138 - DSP Timer interrupt question ...
Check the "Interrupt Handling - Delayed Branch Latency" section of the Day2_AM training presentation located in our "... Michael Williamson

04/04/2013

04:27 PM Software Development: RE: L138 - DSP Timer interrupt question ...
Mike,
Can you add more details regarding this statement: _The DSP loop optimization can create large interrupt lat...
François Tremblay
11:43 AM Software Development: RE: MityDSP-L138F Failure to Boot and Cannot Reset
Also feel free to look through the wiki http://support.criticallink.com/redmine/projects/arm9-platforms/wiki Jonathan Cormier
11:40 AM Software Development: RE: MityDSP-L138F Failure to Boot and Cannot Reset
The username for the modules should be _root_
Jonathan Cormier

04/03/2013

10:16 PM Software Development: RE: MityDSP-L138F Failure to Boot and Cannot Reset
Hi,
Thank you so much for supporting.
For (1): At the first time. Now the board are running with null modem cable...
minh tung
07:17 AM Software Development: RE: MityDSP-L138F Failure to Boot and Cannot Reset
I am assuming these are out of the box Development kits?
For (1) the console UART, please ensure you are using the...
Michael Williamson
08:27 AM PCB Development: RE: Resistors in EMA signal and adress traces?
Mike,
it's the L138-FX-225-RC Module. No FPGA.
I'm concerned about both kinds of traces.
Christian
Christian Rückl
07:33 AM PCB Development: RE: Resistors in EMA signal and adress traces?
Which part number? Specifically, does the module include an FPGA or not?
Which EMA traces are you concerned with,...
Michael Williamson
07:30 AM PCB Development: Resistors in EMA signal and adress traces?
Hi,
can anybody tell me if there are already resistors on the EMA-traces on the L138-Modul integrated? If yes, wha...
Christian Rückl

04/02/2013

10:36 PM Software Development: MityDSP-L138F Failure to Boot and Cannot Reset
Hello
I am using Industrial I/O board(80-000268RI-2 A) and 2 L138 board (L138-CG-225-RC ,L138-FG-225-RC).I got 2 i...
minh tung

03/28/2013

11:44 AM Software Development: SATA not recognized
Trying to install an intel 330 series SSD (60 Gb). I have a power brick for it and plugged that in. Connected to th... Mary Frantz

03/26/2013

11:48 AM Software Development: RE: SPI NOR Flash memory map
You are correct, Mike. The flash does have to be erased before writing. Here is a more fleshed out version of my cod... Mary Frantz
11:13 AM Software Development: RE: SPI NOR Flash memory map
BTW:
It's not entirely clear to me if the write routine above will work properly. I don't know for sure, off-hand...
Michael Williamson
11:11 AM Software Development: RE: SPI NOR Flash memory map
The SPI partitions are defaulted in the board-mityomapl138.c file in arch/arm/mach-davinci in the spi_flash_partition... Michael Williamson
10:55 AM Software Development: RE: SPI NOR Flash memory map
Please allow me to chime in with a similar question... I have "reorganized" the upper part of the spi nor flash on my... Fred Weiser

03/22/2013

03:13 PM Software Development: RE: Creating a Read-Only Filesystem
I worked on it some more and ended up with a script with seven patch files that change it to a read-only filesystem. ... Jim Twyman
01:01 PM FPGA Development: RE: L138F - FPGA gets incorrect data from UPP
Marek,
The UPP clocks may be sourced by either the FPGA or the OMAP-L138 based on your configuration requirements....
Michael Williamson
11:02 AM FPGA Development: L138F - FPGA gets incorrect data from UPP
Hello,
I have problem when trying to read data on UPP by FPGA (sent from OMAP - working with L138F, XC6SLX45, ISE ...
Marek Bartu

03/20/2013

09:16 AM Software Development: RE: Creating a Read-Only Filesystem
Jim,
Any luck? As far as I can tell that mount entry should work.
Jonathan Cormier

03/15/2013

11:32 AM Software Development: RE: MDK_2012-08-10 default configuration
Mike,
Thanks for pointing that out - really helpful!
I can most definitely see the network (and boot from it) from ...
Lars Majlof

03/14/2013

08:25 PM Software Development: RE: MDK_2012-08-10 default configuration
So the industrial IO board uses PHY address 3 and the EMAC driver is configured to look for that MDIO interface prior... Michael Williamson
07:06 PM Software Development: RE: MDK_2012-08-10 default configuration
My custom board uses either PHY address 1 or 0 - both addresses cause the same problem.
I played around a little wit...
Lars Majlof
08:59 AM Software Development: RE: Creating a Read-Only Filesystem
I changed fstab for the /mnt/user_nand to as follows -
/dev/mtdblock1 /mnt/user_nand jffs2 defaults...
Jim Twyman
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)