Activity
From 04/29/2013 to 05/28/2013
05/28/2013
- 03:44 PM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- Finally... I have a u-boot image that will boot from the 512MB (4096k page) NAND.
It is now based on the main-line u...
05/17/2013
- 04:15 PM Software Development: RE: Difficulty in flashing MLO and U-Boot to the AM3354 with 512MB NAND
- Another pre-weekend update...
I finally (after battling mr. Murphy numerous times) got the MLO and U-Boot loading fr...
05/16/2013
- 02:33 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
- BTW: If you have a smart-phone, you should be able to download a free data-matrix code reader.
-Mike - 02:31 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
- Check the "Module Product Change Notifications":http://support.criticallink.com/redmine/projects/armc8-platforms/wiki...
- 02:25 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
- Thanks for the quick reply Mike.
I modified my kernel config to enable the TPS65910.
CONFIG_RTC_DRV_TPS65910=y
#... - 01:37 PM Software Development: RE: RTC Not Keeping Time Between Power Cycles
- Hi Brian,
Can you let me know which revision of AM3359 module you have? The RTC power design was updated in Rev C... - We are using a 3359 development board and have found that the RTC is not keeping time between power cycles. Each tim...
05/13/2013
- According to the MityArm 335x Datasheet the minimum input voltage is 3.2VDC and the typical is 3.3VDC. Is the minimum...
05/01/2013
- 03:52 PM Software Development: RE: Pin Mux on AM3359
- Thanks Tim I think I am on the right track now.
I made the following changes in baseboard-mityarm335x-edvkit.c:
<... - 11:36 AM Software Development: RE: u-boot question
- Thanks Tim,
That would do it.
John C. - 11:34 AM Software Development: RE: u-boot question
- John
That ID string is actually being printed by the MLO, not u-boot.
You'll need to reflash the MLO to see the cha... - Hi,
We have the older MITYARM 335x modules with the DDR2 and have done minor tweaking to u-boot (as in adding u...
04/30/2013
- 05:28 PM Software Development: RE: Linux Can't Detect Module NAND on Custom Carrier
- Thats great news... I'll tuck that bit of info away for later!
cheers
/Tim - 04:58 PM Software Development: RE: Linux Can't Detect Module NAND on Custom Carrier
- We got to the bottom of this. We had some pullups on some of the higher order SYSCONFIG bits, setting boot clock to ...
- 01:43 PM Software Development: RE: Linux Can't Detect Module NAND on Custom Carrier
- Tim,
Thanks. I've checked the pinmux settings and could find nothing that struck me as incorrect. We are using t... - 07:08 AM Software Development: RE: Linux Can't Detect Module NAND on Custom Carrier
- Mike,
Check the pinmux settings and connections for the rest of the GPMC signals. I would think if there was an elec... - 12:32 PM Software Development: RE: Pin Mux on AM3359
- Brian
On the AM335X based SOM's the linux kernel (assuming you are using linux) will need to configure all of the pi... - I am working with a AM3359 dev kit and need to get UART 1 and 2 working. As I understand they are configured for CAN...
04/29/2013
- Hello,
We are having a odd problem with a custom carrier, and wondering if anyone has come across a similar situat... - 10:20 AM Software Development: RE: MityArm u-booting from SPI flash
- Mike,
I should also mention that on TI's wiki page (at the bottom) they mention that when you do build uboot fo...
Also available in: Atom
Go to top
