Project

General

Profile

Activity

From 10/12/2013 to 11/10/2013

10/30/2013

11:44 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
I noticed while working on your board that you are using debian as your root filesystem. Could you point me ...
Jonathan Cormier

10/29/2013

04:05 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
thanks for the support great job. yes fstab need to be fixed along with omap-i2c timeout. dan mcgee
03:50 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Also this is unrelated but your /etc/fstab file was corrupted on the sd card you sent to us and was throwing a few er... Jonathan Cormier
03:36 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
I found the issue. There was a pin in conflict. The mmc2_wl12xx_init() was using one of the pins your rmii ...
Jonathan Cormier
02:17 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Interesting, I tried fixing my typo and it breaks ethernet.... Jonathan Cormier
01:55 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
thanks work great, but two questions:
1) why is the rmii2 pin mux being called from the baseboard_setup_can()?
2...
dan mcgee
11:55 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I'm fairly certain the only difference with my patch is it doesn't mess up all the whitespace and so should cleanly a... Jonathan Cormier
11:51 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Here is my version of your patch which was applied to the head of the mityarm-linux-v3.2 branch.
EDIT:
Attached...
Jonathan Cormier
11:48 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I based it off the mityarm-linux-v3.2 branch but also tested it using the cl_v3.2_AM335XPSP_04.06.00.07 tag that you ... Jonathan Cormier
11:47 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
the error index are expected, no i/o (sign) attach dan mcgee
11:45 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
which git tag do you use? dan mcgee
11:43 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I brought it up with
# ifconfig eth0 up
# dhclient eth0
and then _scp_'d the kernel uImage file
Jonathan Cormier
11:41 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
great, how did you test the ethernet? dan mcgee
11:39 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
I compiled the 3.2 kernel for your board. The networking seems to be working for me (see below). Also the u...
Jonathan Cormier
09:12 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
the only change was the usb cdc device. attach is our .config file dan mcgee
09:09 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I would recommend that you guys sync up on your .config files for the kernel builds as well.
-Mike
Michael Williamson
09:06 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
ok we are know on the same page. let me see what i can come up with. dan mcgee
09:04 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Yes, but you had suggested I test this on our devkit which we don't have such a pic. Jonathan Cormier
09:03 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
on the board is a pic that is connected to /dev/ttyACM0 dan mcgee
09:01 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
What I meant was that we don't have a physical usb device that identifies itself as /dev/ttyACM0. Jonathan Cormier
08:59 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
in the config menu dan mcgee
08:59 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
when you build the kernel add a usb cdc acm device. dan mcgee
08:54 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan, I don't have a /dev/ttyACM0 device. The only one i have is attached to your board. I'm currently trying to ge... Jonathan Cormier
08:52 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
you can test this by running the usb_test /dev/ttyACM0 dan mcgee
08:25 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I had meant that I pulled the patch from the 3.2 branch into the 3.1 branch where you already had ethernet working. ... Jonathan Cormier

10/28/2013

07:35 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
i ran the patch on your mityarm board. I found the usb to be unstable, ethernet works. dan mcgee
06:19 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
what does this patch address? in the 3.2 kernel the usb works great. the rmii2 ethernet is the problem. dan mcgee
06:12 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
downloading now, the wait on /dev/mmcblk.... is do to the gpio.cd and gpio.wp should be set to -EINVAL. dan mcgee
05:24 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
I found a patch on the 3.2 branch that may solve the problem your having. I pushed it to a new branch on our...
Jonathan Cormier
03:36 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
background:
usb_test runs all day on 3.2 kernel with git tag:cl_v3.2_AM335XPSP_04.06.00.07
on AM335XPSP_04.06.00.02...
dan mcgee
02:56 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
Can you provide specific details on what you are doing to create the usb_test program and what device you hav...
Bob Duke
01:47 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
yes the udev update and script does restart the usb2 port. thanks for the patch.
usb is still unstable running ~/usb...
dan mcgee
10:25 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Dan,
We found a bug in our reference filesystem. I created a wiki page on it. Could you please apply the changes ...
Jonathan Cormier

10/25/2013

01:37 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Are you applying your patch on top of these checkouts? Jonathan Cormier
01:21 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
the usb port is stable on tag cl_v3.2_AM335XPSP_04.06.00.07
but Ethernet will not work. usb is unstable on tip AM335...
dan mcgee
10:27 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
still a problem with usb on this branch. dan mcgee
10:23 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Could you post an updated patch to show what was changed to resolve the issue?
Thank you.
Alexander Block
10:04 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
thank you for the support dan mcgee
10:01 AM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
commented out some of the pin mux structs and now Ethernet is working. dan mcgee

10/24/2013

01:22 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
we are not using flash dan mcgee
01:15 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
Also do you plan on using the nand? You have a module that has the larger 512MB nand which requires the latest u-boo... Jonathan Cormier
01:14 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
new patch file using format-patch --ignore-space-change dan mcgee
01:08 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
I'm having a hard time finding the actual change in the patch. If you could recreate your patch ignoring white space... Jonathan Cormier
01:03 PM Software Development: RE: Ethernet RMII2 working in u-boot, but not kernel
FYI, the kernel has very strict rules about formatting. In this case the use of tabs instead of spaces. Most of you... Jonathan Cormier
12:43 PM Software Development: Ethernet RMII2 working in u-boot, but not kernel
problem description:
no eth0 data begin transmitted on tx0 or tx1 lines, running with rmii2 configuration.
mac_cont...
dan mcgee

10/22/2013

11:42 AM PCB Development: RE: VBACKUP Current Draw
Mark,
This change has been added to u-boot. The following branches have the fix:
* AM335XPSP_04.06.00.03
http...
Jonathan Cormier
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)