Mity CPU Platforms » MitySOM-335x (ARM Cortex-A8 Based Products)

02/04/2014

05:22 PM Software Development: RE: Booting from Nand

Bindu,
I can't see anything wrong with your environment. Are you able to boot nfs while loading off the sd card w... Jonathan Cormier

04:18 PM Software Development: RE: Booting from Nand

Sorry about the formatting on that last post! Yeah turns out using the new files works! The files that come on the SD... Bindu Jagannatha

03:01 PM Software Development: RE: Booting from Nand

Your flashing steps look fine. Let me know if anything changes with the new files.
The new sd card image has the ... Jonathan Cormier

02:54 PM Software Development: RE: Booting from Nand

Can you edit your post and put the output inside pre tags. You can highlight text and hit the pre button above text ... Jonathan Cormier

02:45 PM Software Development: RE: Booting from Nand

Jonathan,
Thank you for moving this over. Kernel version on the board is 3.2.0+. I used the MLO and uBoot file fro... Bindu Jagannatha

08:02 AM Software Development: RE: Booting from Nand

Hi Bindu. Can you confirm that you are using a mlo and uboot that was built with the following config 'mityarm335x_4... Jonathan Cormier

07:49 AM Software Development: Booting from Nand

Moving post for Bindu. Reference https://support.criticallink.com/redmine/boards/28/topics/1437?r=3602#message-3602
... Jonathan Cormier

02:21 PM Software Development: RE: WL1271 Calibration tool

Greg,
Have you been able to get the wifi calibration tool running on the evaluation board?
Thanks
Jesse Jesse Johnston

07:50 AM Software Development: RE: Flashing NAND from SD Card

Hi Bindu,
A lot has changed since this post was made. I've created you a separate thread that references this one... Jonathan Cormier

02/03/2014

07:44 PM Software Development: RE: Flashing NAND from SD Card

Hello,
Has there been any progress on this? I followed the instructions on this page: https://support.criticallink... Bindu Jagannatha

01/31/2014

01:42 PM Software Development: RE: MityARM Kernel Versions, TI SDK and PSP Questions

1. The CL and TI website suggest Ubuntu 10.04 LTS, but the LINUX kernel version is 2.6.37. How is possible to build 3... Jonathan Cormier

09:44 AM Software Development: MityARM Kernel Versions, TI SDK and PSP Questions

Posting this on behalf of a customer:... Alexander Block

01/16/2014

04:45 PM Software Development: RE: WL1271 Calibration tool

Thanks for the information. Just to be clear, I am not having trouble using wireless on the evaluation board. I am o... Jesse Johnston

01:39 PM Software Development: RE: WL1271 Calibration tool

Hello Jesse,
We attempted to run the calibration tools as well, and have seen the same result as you. We are looki... Greg Dias

10:44 AM Software Development: RE: 3.1 vs 3.2 Kernel MityARM-335x Dev Kit HDMI not working consistently

Environment variable can be setup like:... Jonathan Cormier

10:42 AM Software Development: RE: 3.1 vs 3.2 Kernel MityARM-335x Dev Kit HDMI not working consistently

This is normal. As far as I'm aware the 3.1 kernel was never updated to initiate the HDMI chip and relied on u-boot ... Jonathan Cormier

01/13/2014

04:22 PM Software Development: RE: WL1271 Calibration tool

Jonathon,
You're correct, I was using the commands from the wrong section. Unfortunately, following the correct c... Jesse Johnston

03:09 PM Software Development: RE: WL1271 Calibration tool

Have you tried running the commands from this section: http://processors.wiki.ti.com/index.php/WL12xx_NLCP_Calibratio... Jonathan Cormier

02:38 PM Software Development: RE: WL1271 Calibration tool

Just to be clear, there is a lot of additional output when I try to run the calibrator command. I can post it all if... Jesse Johnston

02:28 PM Software Development: WL1271 Calibration tool

I'm trying to run the WL1271 calibration tool and generate an NVS file and I am running into some problems.
Setup ... Jesse Johnston

01/10/2014

07:56 PM Software Development: 3.1 vs 3.2 Kernel MityARM-335x Dev Kit HDMI not working consistently

This is being posted on behalf of a customer.... Alexander Block