Project

General

Profile

Activity

From 06/30/2014 to 07/29/2014

07/14/2014

09:43 AM Software Development: RE: SPI clock issues with using newest u-boot
Yeah by using the ti_ 335x include files I was hoping to greatly simplify our config file. Hopefully it hasn't cause... Jonathan Cormier
09:31 AM Software Development: RE: SPI clock issues with using newest u-boot
Ok,
I knew it had to be in there somewhere, was just a bit confused
as the original mityarm335x.h had a nice ...
Anonymous
09:26 AM Software Development: RE: SPI clock issues with using newest u-boot
Pretty sure I found "#define CONFIG_SPI" in one of the ti_ config files that get included. Jonathan Cormier
09:25 AM Software Development: RE: SPI clock issues with using newest u-boot
Yes the Micron N25Q00AA does support the 48Mhz clock. The sf erase still seems longer
but I'll need to time it get ...
Anonymous

07/11/2014

05:26 PM Software Development: RE: SPI clock issues with using newest u-boot
Also make sure your Nor chip supports 48Mhz on the spi bus. Jonathan Cormier
05:25 PM Software Development: RE: SPI clock issues with using newest u-boot
Did you notice any time difference with the slower speed? Jonathan Cormier
03:30 PM Software Development: RE: SPI clock issues with using newest u-boot
I took out the CONFIG_SPI_FLASH_BAR define and it now seem to pass the long erase command.
-----------------------...
Anonymous
02:23 PM Software Development: RE: SPI clock issues with using newest u-boot
It may be perfectly fine with the generic name then.
Try changing the spi clock speed and see if you get different...
Jonathan Cormier
02:19 PM Software Development: RE: SPI clock issues with using newest u-boot
I added the CONFIG_SPI_FLASH_BAR define to mityarm335x.h and the warning is goes away on the "sf probe" command.
I a...
Anonymous
01:38 PM Software Development: RE: SPI clock issues with using newest u-boot
1) I'm not sure why its detecting it differently. Maybe the newer u-boot has a more specific driver for this chip?
...
Jonathan Cormier
12:44 PM Software Development: RE: SPI clock issues with using newest u-boot
Hey Johnathan,
Testing out the new spi bus changes seem fine. I do have two quick questions:
1) The original...
Anonymous

07/10/2014

05:10 PM PCB Development: RE: Time drift
The skipping bad block is not an error but more of an info. Blocks can be marked bad from factory and during use. T... Jonathan Cormier
04:19 PM PCB Development: RE: Time drift
The clock is working now. Thank you.
But when we flash the nand, there is an error:
root@mityarm-335x:~# flash_...
Bindu Jagannatha
03:29 PM PCB Development: RE: Time drift
So if this is the problem I'm thinking of. It was discovered that when we changed to the 3.2 kernel we weren't setti... Jonathan Cormier
03:26 PM PCB Development: RE: Time drift
Hey Jonathan,
Thanks again, we will definitely try this solution and let you know if it works. I would like to kno...
Bindu Jagannatha
03:00 PM PCB Development: RE: Time drift
I've attached the lastest uImage but yes you can build it if you would like. Instructions are here [[Linux_Kernel]]
...
Jonathan Cormier
02:57 PM PCB Development: RE: Time drift
NAND read: device 0 offset 0x340000, size 0x500000
Skipping bad block 0x00780000
5242880 bytes read: OK
## Bootin...
Bindu Jagannatha
02:56 PM PCB Development: RE: Time drift
We used the pre-build kernel image that came with the board. The kernel that in the Virtual Machine/home/mitydsp/proj... Bindu Jagannatha
08:12 AM PCB Development: RE: Time drift
What version of the kernel came with your devkit? Could you post a boot log?
Particularly I want to know if your ...
Jonathan Cormier

07/09/2014

05:12 PM Software Development: RE: SPI clock issues with using newest u-boot
Just pushed a fix for this.
http://support.criticallink.com/gitweb/?p=u-boot-mityarm-335x.git;a=commit;h=82762ccda72...
Jonathan Cormier
04:33 PM PCB Development: RE: Time drift
Here is our clock tree (in /sys/kernel/debug/clock/summary):
clock-name parent-name ...
Bindu Jagannatha
04:14 PM PCB Development: RE: Time drift
When we boot into Linux and use the "date" (system clock) and "hwclock" (RTC I assume) commands to set/ask for time, ... Bindu Jagannatha
08:02 AM PCB Development: RE: Time drift
Hi,
What do you mean by "hardware and software" clocks. Are you using the RTC or just the system clock? Can you ...
Michael Williamson

07/08/2014

03:06 PM PCB Development: Time drift
Hello,
We bought a MityARM335x dev kit months ago. We have noticed that the time on the board (both software and h...
Bindu Jagannatha

07/01/2014

09:49 AM Software Development: RE: SPI clock issues with using newest u-boot
U-Boot# sf probe 0:0
SF: Unsupported flash IDs: manuf ff, jedec ffff, ext_jedec ffff
Failed to initialize SPI flash...
Anonymous
09:49 AM Software Development: RE: SPI clock issues with using newest u-boot
Jonathan,
I checked with manufacturing and they do use the command in verification
of basic communication wit...
Anonymous

06/30/2014

05:06 PM Software Development: RE: SPI clock issues with using newest u-boot
Following your lead and my hardware engineers suggestion we did a temporary check and set 0x44E00050
(CM_PER_SPI1_C...
Anonymous
05:03 PM Software Development: RE: SPI clock issues with using newest u-boot
Committed change.
http://support.criticallink.com/gitweb/?p=u-boot-mityarm-335x.git;a=commit;h=bc7833792442421a60e74...
Jonathan Cormier
04:54 PM Software Development: RE: SPI clock issues with using newest u-boot
I'm testing this change right now and am going to push a commit if it works. Jonathan Cormier
04:48 PM Software Development: RE: SPI clock issues with using newest u-boot
Thanks. Let me take a look and if it works. Anonymous
04:45 PM Software Development: RE: SPI clock issues with using newest u-boot
I think I found the problem. The memory address 0x481A0000 refers to McSPI1 and only spi0 is enabled in the u-boot.
...
Jonathan Cormier
04:40 PM Software Development: RE: SPI clock issues with using newest u-boot
We had originally set up to boot out of SPI NOR and on occasion do use that ability for
manufacturing testing. The ...
Anonymous
04:16 PM Software Development: RE: SPI clock issues with using newest u-boot
No since booting from the spi nor on our SoMs doesn't work and I wasn't aware of anyone using the nor, I didn't look ... Jonathan Cormier
03:40 PM Software Development: RE: SPI clock issues with using newest u-boot
Hey Jonathan,
Looking at your release without any of my mods, serial NOR was removed (no sf commands.) Was ther...
Anonymous
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)