Project

General

Profile

Activity

From 03/02/2017 to 03/31/2017

03/21/2017

07:21 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Im thinking it's related to the preloader. The preloader is the one who does all the pin muxing for the HPS periphera... Daniel Vincelette
07:06 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Dan,
When re-building an SD card image using my kernel (uImage), the DTB you attached, and the FPGA image (....
Jared Kirschner
04:19 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
I've attached my preloader/uboot/fpga image.
I've also attached the spi_test c++ code I was working with, I've rem...
Daniel Vincelette
03:00 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Dan,
I replaced the uImage on my SD card (at /boot) with the uImage I sent you (to ensure it's the same as w...
Jared Kirschner
02:07 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
I've tried your kernel and the RX buffer is still working. I couldn't get uboot to actually boot your device-tree, I ... Daniel Vincelette
12:29 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
I've tried it with our 3.16 kernel and Altera's 4.1.22 and 4.1.22 RT kernel. All get data on the RX side. I'll try yo... Daniel Vincelette
12:26 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Dan,
I've attached the requested files (Linux 4.1.22 LTSI RT branch compiled into "uImage" with defconfig "s...
Jared Kirschner
12:41 AM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hi Jared,
Unluckily I wasn't able to recreate the issue you are seeing. My RX buffer has the expected 0x8330 inste...
Daniel Vincelette

03/20/2017

07:53 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hi Jared,
I'm in the middle of recreating your test with one of our dev kits. I'll connect up the MOSI to the MISO...
Daniel Vincelette

03/15/2017

01:47 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Mike,
I modified the SPI device tree entry to have an "spi-max-frequency" of 1 MHz (a slow clock speed, as y...
Jared Kirschner

03/14/2017

12:44 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Mike,
I just saw this message, and will try it out first thing tomorrow. Unfortunately, a snow storm is prev...
Jared Kirschner

03/13/2017

05:20 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Here is some example code from the linux kernel documentation area.
BTW: our FPGA driver and the SPI HPS "hardc...
Michael Williamson
02:52 PM Software Development: u-boot bug reading gpio
I found a problem reading the HPS gpio in uboot.
E.g ...
Chris Ward

03/10/2017

05:34 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Hello Mike,
We've since conducted a loopback test (MOSI connected to MISO within the FPGA) and observed no change ...
Jared Kirschner

03/09/2017

08:28 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Are you referring to modifying the FPGA such that MOSI is connected to MISO?
If that works, it might indicate that...
Jared Kirschner
06:43 PM Software Development: RE: SPI Comm - can transmit data from Linux, but not receive
Have you tried using the Loopback option to see if you can just loop back the command data and if RX is OK?
-Mike
...
Michael Williamson
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)