Activity
From 01/16/2012 to 02/14/2012
02/14/2012
-
03:24 PM
ARM9 Based QNX Platforms
Software Development: RE: Running SYS/BIOS on the ARM MityDSP-L138 module
- Dave,
I've been over on the e2e forum for a couple weeks getting our current DSP
running on the OMAP137. TI has confirmed that their Network Development Package
does not support the 137. So I'll need to get a 138 dev board and h... - DS 03:14 PM ARM9 Based QNX Platforms Software Development: RE: Running SYS/BIOS on the ARM MityDSP-L138 module
- This is something that we haven't done yet.
TI has some info on this: here are some links that may be worth exploring:
TI's starterware:
http://processors.wiki.ti.com/index.php/StarterWare
and SYSBIOS wiki:
http://processors.w... -
11:21 AM
ARM9 Based QNX Platforms
Software Development: Running SYS/BIOS on the ARM MityDSP-L138 module
- Hi,
I'm currently using a Spectrum Digital's OMAP-L137 eval board to run some older DSP code and I'd like to have the ARM collect Ethernet
data via TI's NDK and pass it through to the DSP. Because there seems to be no underlyin...
02/08/2012
- DB 11:51 AM MityDSP (TI TMS320C6xxx Based Products) PCB Development: RE: AUX I/O Connector location dimensions
- Thanks Mike,
I have Rev 1/Document Revision: Draft – MityDSP-Pro Rev. B dated Nov 15th 2009 of the design guide and it wasn't in that. I guess there must be a later version. Is the only place to get the documents on the web site were ... - MW 10:58 AM MityDSP (TI TMS320C6xxx Based Products) PCB Development: RE: AUX I/O Connector location dimensions
- Hi Doug, dorry for the delay.
The information you need should be in the MityDSP-Pro Carrier board design guide, I am attaching a copy of the figure here. Is this what you need?
-Mike
!MityDSP-PRO-Aux_Connector_Location.png! - DB 10:48 AM MityDSP (TI TMS320C6xxx Based Products) PCB Development: RE: AUX I/O Connector location dimensions
- I would like to get a reply to my question. I am finishing up my layout and need to place the connector.
Thanks,
Doug
02/06/2012
- (posted on behalf of a customer for the MityARM-1808F module)
Any advice on how to connect your EMIF interface to an AXI bus (a Xilinx FPGA core standard) in the FPGA would be appreciated.
02/03/2012
- It is recommended to use the AUX I/O connector on the MityDSP-Pro on carrier board designs but I can't seem to find any documentation on the location of the connector. Please let me know if it is called out in any of the documentation. I...
02/01/2012
- (posted on behalf of a customer)
A quick question for you, or perhaps someone else on your team, regarding
the RTC on the L138 modules and the profibus development kit battery:
We have noticed that the RTC batteries have been run...
01/26/2012
- BC 01:29 PM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: Looking for top-level module for FPGA Hands-on exercise for MDSP-Pro
- Oops! I see it there. Thanks, Mike. That'll work.
- MW 12:51 PM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: Looking for top-level module for FPGA Hands-on exercise for MDSP-Pro
- Hi Bob,
Is it not included in the hdl.zip download file? (pulse_gen.vhdl)
-Mike
- Is it possible to get the "answer" top-level module for the MDSP Training Day 1: MityDSP FPGA – Hands-on exercise?
This would be very helpful for me in creating my own module for the MityDSP-Pro.
Thanks.
-Bob Clarke
01/18/2012
- BC 11:23 AM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: MityDSP-Pro and host board schematics?
- Mike,
thanks. I will take a look at the info there -- it looks like it will answer a number of our questions. I will contact Tom about the module schematics.
-Bob Clarke - MW 08:11 AM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: MityDSP-Pro and host board schematics?
- The Mainboard schematics are available in the "Files Tab":http://support.criticallink.com/redmine/projects/dsp-products/files. Please contact Tom Catalino (catalino@criticallink.com) about the module schematics. If he agrees that the p...
01/17/2012
- BC 05:25 PM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: Bank switching for different FPGA applications
- Mike,
my plan was to whip up the application but leave the boot loaders in place for both the DSP and FPGA. I assume that this will be ok if I put my application in the first application storage location. I only plan on using a single a... - MW 05:11 PM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: Bank switching for different FPGA applications
- Hi Bob,
The only problem with "whipping stuff up from scratch" will be the fact that the bootloader application provided needs to be able to control the bank-switching serial shift register (via the FPGA) per the addressing scheme def... - MW 05:12 PM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: MityDSP-Pro and host board schematics?
- Hi Bob,
I am working to post the Motherboard schematics. We may need an NDA or something for the PRO schematics, I will get back to you on that as soon as possible. Sorry for the delay.
-Mike
- Is it possible to get the schematics posted for these boards? As a minimum I would like to get the pin-out for the DSP and the FPGA on the MityDSP-Pro. The motherboard schematics would also be helpful - we're building our application on ...
01/16/2012
- BC 11:01 AM MityDSP (TI TMS320C6xxx Based Products) FPGA Development: RE: Bank switching for different FPGA applications
- Mike,
thanks for the info. I understand that you folks have generated a number of cores that should automatically take care of this and other features of the FPGA. Our application is extremely simple and it will be most expedient for me...