Activity

From 03/29/2022 to 04/27/2022

05:14 PM MitySOM-335x (ARM Cortex-A8 Based Products) PCB Development: RE: Used I2C pins on MitySOM: Also for new designs, we recommend that you send us your custom baseboard design for review. We can make sure nothin... Jonathan Cormier
05:01 PM MitySOM-335x (ARM Cortex-A8 Based Products) PCB Development: RE: Used I2C pins on MitySOM: Please see the Appendix for the "Carrier Board Design Guide":https://www.criticallink.com/wp-content/uploads/MitySOM-... Jonathan Cormier
04:33 PM MitySOM-335x (ARM Cortex-A8 Based Products) PCB Development: Used I2C pins on MitySOM: On the datasheet there is a note;
Note 4: I2C1 and I2C2 are used by devices on the module and therefore should not... Anthony Barker

01:12 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: I can't reach the developers of Basler. Can you ask me how to adjust the exposure time of the camera?
I will wait fo... xiang zhang
08:28 AM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: Hi Mike,
Thank you for your answer.
You mean that the setting of parameter AutoTargetBrightness in the main fil... xiang zhang

03:14 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: Hi Xiang,
This camera is a product from Basler, using their provided ARM based "Pylon SDK":https://www.baslerweb.c... Michael Williamson
02:54 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: What exactly should I do to apply the exposure time to the camera. I don't quite understand what you mean. xiang zhang
02:48 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: GenICamModel.cpp Michael Williamson
02:43 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: Where can I find this function? xiang zhang
02:37 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: Use the model.dump() function.
Michael Williamson
02:18 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: xiang zhang wrote in message#6191:
> Michael Williamson wrote in message#6189:
> > You might dump out all the regis... xiang zhang

02:26 AM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: Michael Williamson wrote in message#6189:
> You might dump out all the registers and check if there is an AutoTarget... xiang zhang

01:13 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: daA1280-54bm
Yes, I ignored the parameter Autotargetbrightness. Thank you. I'll try again.
If I don't adjust th... xiang zhang
12:39 PM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: RE: How to adjust the camera exposure time?: You might dump out all the registers and check if there is an AutoTargetBrightness and make sure that is disabled. W... Michael Williamson
08:55 AM MitySOM-5CSX Embedded Vision Developer's Kit for Basler dart BCON Support: How to adjust the camera exposure time?: In order to adjust the camera exposure time. I add the code in the picture to main.cpp. Recompile and run demo_app. B... xiang zhang

12:33 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: MitySOM 5CSX-H6-53B-RC not booting: Hi Franz,
Based off your boot log the board is stuck at the preloader, before getting into u-boot. The preloader/u... Daniel Vincelette
12:14 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: MitySOM 5CSX-H6-53B-RC not booting: Hello Dan,
I made the changes you suggested and the same issue is still there, at this point I don't think the iss... Franz Sattler

11:31 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: MitySOM 5CSX-H6-53B-RC not booting: Hi Franz,
One difference that stands out to me is the INPUT/OUTPUT TERMINATIONs used. Because the SOM uses a diffe... Daniel Vincelette
02:23 AM MitySOM-5CSX Altera Cyclone V Software Development: RE: MitySOM 5CSX-H6-53B-RC not booting: Hello Dan,
I have attached the .qsys and .qsf files. These have the instances added as well as the row address wid... Franz Sattler

01:40 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Is it possible to use C++ 11?: Also, Make sure to add the "-std=c++11" flag to the g++ compiler to actually enable c++11 features. Jonathan Cormier
01:06 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Is it possible to use C++ 11?: Hello Mike,
That's exactly what I wanted to know. Thank you very much for your prompt reply :)
Vadym Kolesnyk
12:45 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Is it possible to use C++ 11?: Hi Vadym,
Yes. Are you referring to the DSP programming or the ARM programming?
For the ARM, the version of GC... Michael Williamson
12:32 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: Is it possible to use C++ 11?: I would know is it possible to apply the c++11 standard during development? Vadym Kolesnyk

Also available in: Atom

Go to top

Mity CPU Platforms