Activity
From 05/06/2023 to 06/04/2023
06/04/2023
- 10:37 AM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P PCB Development: RE: VSEL_SD functionality
- Hi Paul,
The VSEL_SD pin is connected to pin 12 of a TPS65219 PMIC on the SOM. VSEL_SD selects which voltage is a...
06/03/2023
- What is the functionality of the VSEL_SD pin (position 176 on the SODIMM connector)? Is it the same signal as VD_SEL ...
06/02/2023
- 03:31 PM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- Note you can update the command line args for the HelloWorld example to work without weston as well.
!clipboard-20... - 03:29 PM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- Sandeep Sivadas wrote in message#6366:
> Hi Jonathan,
>
> We tried the evtest and weston commands. But the matri... - 05:47 AM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- Hi Jonathan,
We tried the evtest and weston commands. But the matrix GUI application is not responding to USB touc... - 02:51 PM MitySOM-AM57X Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Sandeep Sivadas wrote in message#6367:
> Hi Jonathan
>
>
> We followed the guidelines as per the link https://... - 09:58 AM MitySOM-AM57X Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Hi Jonathan
We followed the guidelines as per the link https://support.criticallink.com/redmine/projects/mitysom... - 12:56 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P PCB Development: RE: JTAG TRSTn pulldown and other JTAG pullups
- I corrected the last post. TDO is not pulled up or down on the SOM.
- 12:55 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P PCB Development: RE: JTAG TRSTn pulldown and other JTAG pullups
- Hello,
The SOM includes the following on the JTAG related lines:
* 4.7K Pulldown on TRSTn
* 4.7k Pullup to VDD... - The AM62x datasheet states (in section 6.4) that an external pulldown is required on the TRSTn line. Is this implemen...
05/31/2023
- 02:25 PM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- > hid-generic 0003:0461:0022.0003: input: USB HID v1.00 Device
Okay good news, looks like the HID driver is getting ... - 05:44 AM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- Hi Jonathan,
Thank you for your support.
When i connected the Newhaven Display's USB with the AM572x Developmen... - 12:08 PM MitySOM-AM57X PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi Michael,
We are planned to do our ethernet design with IEEE 1588 PTP hardware support with RJ45 and Fibre commu...
05/30/2023
- 07:26 PM MitySOM-AM57X Software Development: RE: Support for Qt creator application for MitySOM AM57x
- FYI...
- 07:25 PM MitySOM-AM57X Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Sandeep Sivadas wrote:
> Hi,
>
> We have to develop a QT application for our AM57x Development board. which vers... - Hi,
We have to develop a QT application for our AM57x Development board. which version of QT creator is supported ... - 05:48 PM MitySOM-AM57X Software Development: RE: USB touch screen support for AM572x development board
- Newhaven doesn't provide a lot of details on this USB touch interface other than it's a "USB-HID device". Which I wo...
- Hi,
We are using a Capacitive HDMI TFT Module (Make: Newhaven) with AM572x development board. On booting the linu... - 02:56 PM MitySOM-AM57X PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi Sandeep,
As mentioned in the datasheet, all of the VDDSHVx pins with the exception of VDDSHV8 (for the MMC/SD i... - Hi,
We have some doubts regarding designing the Ethernet circuit using DP83640(For PTP hardware time stamp).
1.... - 02:22 PM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- Was able to verify that when plugged into a usb2.0 port, the gadget reports high-speed config and then reports super-...
05/26/2023
- 07:58 AM MitySOM-AM57X PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Michael,
1. We tried to convert the Altium files to Cadence, then it shows converts only ASCII format file of P...
05/25/2023
- 12:38 PM MitySOM-AM57X PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- HI Sandeep,
1. The design files are in Altium Designer. I will ask Tom Catalino to send you an updated version o... - 10:30 AM MitySOM-AM57X Software Development: RE: Query - Example Baseboard I2C Power Monitor
- The original linux kernel driver for the LTC2945 has a 0.001 Ohm resistor value hardcoded in the logic that converts ...
Hi,
We tested the i2C power monitor as per the below link and got the result as shown below.
https://support.c...
05/24/2023
- 12:51 PM MitySOM-AM57X PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Michael,
Thank you for the clarification.
1. Can we get the Allegro cadence PCB file for the MitySOM AM572x... - 11:31 AM MitySOM-AM57X PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Sandeep,
I am sorry for the confusion.
The hirose datasheets don't appear to specify a "pin 1" for these con... - Hi,
There is a mismatch in 100 pin DF40HC(3.0)-100DS-0.4V(58) connector pin details in schematic design and datash...
05/12/2023
- 08:00 AM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- * R59<notextile>(</notextile>USB_ID) behavior
> Can you measure the voltage on R59? (this is on the underside of t...
05/11/2023
- 03:29 PM MitySOM-AM57X PCB Development: RE: eMMC support for MitySOM AM572x
- Sandeep Sivadas wrote:
> Hi,
>
> We need to integrate eMMC Flash with MitySOM SOM. Please suggest appropriate Pa... - 03:11 PM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- Note it can also be a good idea to try a usb-C connector in both directions in case one direction is broken.
- 03:05 PM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- )Masayoshi Furuta wrote in message#6343:
> > tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
>
> The new... - 01:21 AM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- > tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
The new image could NOT solve the problem either.
I ...
05/10/2023
- 02:40 PM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- Jonathan Cormier wrote in message#6341:
> Masayoshi Furuta wrote:
> > https://support.criticallink.com/redmine/proj... - 02:11 PM MitySOM-AM57X Software Development: RE: Example USB (usb 3.0 port) is not work
- Masayoshi Furuta wrote:
> https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
>
> I ... - https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
I tested with this procedure and ...
05/09/2023
- 01:37 PM MitySOM-AM57X Software Development: RE: Yocto build for mitySOM AM57x
- Sandeep Sivadas wrote in message#6337:
> Hi,
>
>
> 1. In the meantime, you should be able to use the released ... - 04:29 AM MitySOM-AM57X Software Development: RE: Yocto build for mitySOM AM57x
- Hi,
1. In the meantime, you should be able to use the released filesystem and replace just the kernel on it. And... - Hi,
We need to integrate eMMC Flash with MitySOM SOM. Please suggest appropriate Part No: for the same.
What w...
05/08/2023
- 07:19 PM MitySOM-AM57X Software Development: RE: Yocto build for mitySOM AM57x
- Added some fixes for a few recipes which SRC urls changed slightly. Let me know if you run into any more issues.
Also available in: Atom
Go to top