Mity CPU Platforms

08/09/2023

04:12 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Dmitry Kolotsei wrote in message#6457:
> Hi Mike
>
> Thank you for help. I has some progress!!!
> I was in proje... Dmitry Kolotsei

03:42 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

"Make clean" does not clear everything to repeat "make uboot". What to do?
I found make scrub_clean
Dmitry Kolotsei

03:26 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi, Mike
And further. I'm not very good in make.
"Make clean" does not clear everything to repeat "make uboot". W... Dmitry Kolotsei

02:49 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi Mike
Thank you for help. I has some progress!!!
I was in project folder, but Makefile was absent in it.
I got... Dmitry Kolotsei

01:15 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi Dmitry,
Try to CD into your software/bootloader directory and just run:
make TGZ=uboot-socfpga.tar.gz SOCFPGA_... Daniel Vincelette

01:08 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi, Mike
Thank you for reply.
I did the instruction https://support.criticallink.com/redmine/projects/mitysom_a... Dmitry Kolotsei

11:44 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi Dmitry,
mitysom_a10s_dsc_defconfig
Follow these instructions when using Quartus 18.0.
https://support.cri... Michael Williamson

11:07 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Which default config I need to use?
Dmitry Kolotsei

10:46 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi, Dan
I got dtb from working SDcard image.
I using mitysom_a10 branch for UBoot compilation.
I prepared .confi... Dmitry Kolotsei

08/08/2023

06:32 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi Dmitry,
I believe the DTS is auto generated for u-boot from the quartus tools. I think the bsp-editor is what g... Daniel Vincelette

04:37 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi, Dan
Thank you for reply.
Can I use DTS as in attachment for "mitysom_a1" branch? I get him from ArrowElectron... Dmitry Kolotsei

02:17 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Replacement UBoot 2014.10 on 2021.04

Hi Dmitry,
The ADRV9009 demo was built using quartus 18.0 and using uboot 2014.10. Critical Link has a uboot 2014.... Daniel Vincelette

12:43 PM MitySOM-A10S Altera Arria 10 Software Development: Replacement UBoot 2014.10 on 2021.04

Hi All
I have working FPGA project based on https://github.com/ArrowElectronics/arrow-adi-intel-psg/wiki/ADRV9009-... Dmitry Kolotsei

11:26 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi, Dan
It is my debug project
Br, Dmitry Dmitry Kolotsei

08/07/2023

02:53 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
You're "After correction.jpg" looks to be correct. Have you also checked if U15 CLK1 behaves the same w... Daniel Vincelette

08/05/2023

04:10 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi, Dan
I returned to start Mitysom project downloaded from git.
After first compilation I see inconsistency betw... Dmitry Kolotsei

08/04/2023

05:42 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
Your pin out and clock project look to be correct. If you're seeing clocks on the output of U15 then I... Daniel Vincelette

08/02/2023

04:36 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi
You are right. My board is rev 4.
I changed the U15 configuration and currently I use CLK0 (pins R24/R23) and ... Dmitry Kolotsei

08/01/2023

02:32 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
The revision is at the end of the 80-# number of the white tag. For example, 80-001124RC-*4*A is a rev ... Daniel Vincelette

08:03 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi
I have rev 9 board and working in accordance with datasheet pointed by you.
You can make sure in that by scree... Dmitry Kolotsei

07/31/2023

06:15 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
It looks like you are using the pinout from the rev 8 of our SOM but I believe you have an earlier rev ... Daniel Vincelette

07/30/2023

02:21 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dan,
Thank you for the reply.
I added proposed assignments.
I recreated the differential signals on pins. Qua... Dmitry Kolotsei

07/28/2023

05:33 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
Do you have differential terminations enabled for these signals? If not that might be the issue. The sy... Daniel Vincelette

05:11 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi all,
SI5338 is working correct, I see right frequencies on output pins (CLK0A, CLK0B, CLK2A, CLK2B) of chip U15... Dmitry Kolotsei

11:02 AM MitySOM-AM57X Software Development: RE: ICE cannot be connected to SOM without FGPA

Glad to hear it. Jonathan Cormier

01:56 AM MitySOM-AM57X Software Development: RE: ICE cannot be connected to SOM without FGPA

By shorting pins 4 and 8, we were able to connect the ICE to the CPU. Masayoshi Furuta

07/27/2023

04:03 PM MitySOM-AM57X Software Development: RE: ICE cannot be connected to SOM without FGPA

On J4, the TDIS signal is supposed to be connected to GND. I tested the connection on a module by shorting pins 4 an... Jonathan Cormier

02:46 PM MitySOM-AM57X Software Development: RE: ICE cannot be connected to SOM without FGPA

I was able to reproduce your results on a 5746-PX-4AA-RI Rev2A. We will look into this. Jonathan Cormier

07:33 AM MitySOM-AM57X Software Development: ICE cannot be connected to SOM without FGPA

I am having trouble making ICE connections with the following SOM
　・5728-PX-4AA-RI
　・5729-PX-4AA-RI
　・5746-PX-4A... Masayoshi Furuta

07/19/2023

09:04 AM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi, Dan
Thank you very much for help.
PLL is reconfigured.
Dmitry Dmitry Kolotsei

07:00 AM MitySOM-AM57X PCB Development: RE: Unconnected pins, board dimensions and hole positions

1.The J1 and J3 connectors of "MitySOM-AM57 (non-FPGA variant)" are described as “MFIO” for “Type”.
"If this pin is ... Masayoshi Furuta

07/18/2023

06:46 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hello,
I have found a deficiency in our instructions, the register header files needs to be manually updated in or... Daniel Vincelette

03:20 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

h-files for generating bin-files Dmitry Kolotsei

03:04 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
Can you please attach your header files that you used to generate the 2 binaries as well?
Thank you,... Daniel Vincelette

02:54 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi, Dan
Thank you for help.
This image is started.
Next step. I prepared U14PLL.bin in accordance with recomme... Dmitry Kolotsei

02:03 PM MitySOM-A10S Altera Arria 10 Software Development: RE: Mitysom a10s does not start under U-Boot 2021.04

Hi Dmitry,
We have just recently found an issue with the released SD cards for the 480KLE version of the SOM, whic... Daniel Vincelette

11:22 AM MitySOM-A10S Altera Arria 10 Software Development: Mitysom a10s does not start under U-Boot 2021.04

Hi all.
I need to change the on-board PLL configuration to get the frequency 322.265625 MHz.
I am trying to use U... Dmitry Kolotsei

11:59 AM MitySOM-AM57X PCB Development: RE: Unconnected pins, board dimensions and hole positions

Hello,
To be clear, this information is for the MitySOM-AM57 (non-FPGA variant). I am sorry I was thinking you w... Michael Williamson

01:58 AM MitySOM-AM57X PCB Development: RE: Unconnected pins, board dimensions and hole positions

> If you have specific pins that are of concern, please let us know which ones.
Is it okay to leave the following ... Masayoshi Furuta

07/17/2023

02:15 PM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Thanks, Jon!
Tom Thomas Catalino

02:01 PM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Thanks for pointing that out. Posted updated schematics and noted them on this new wiki page. https://support.critic... Jonathan Cormier

08:49 AM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Hi,
Can you please share the schematic design file location in the website. I am getting old schematic design from... Sandeep Sivadas

07/14/2023

01:05 PM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Here is a snapshot from the devkit design in case it helps. The full schematic is available in the files section.
... Jonathan Cormier

09:35 AM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Hello,
I had edited my previous post to correct. Yes it is:
Correct: AM572x (USB_TXN/P0)
The 80-001317RH-5_... Michael Williamson

01:19 AM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

> MitySOM-AM57 System on Module (J3, J14)) ~ HD3SS3220IRNHR (U12) ~ USB TypeC (J13) connection (SSTX_P / _N, SSRX_P /... Masayoshi Furuta

07/13/2023

10:39 PM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

> Pin 33/35 are connected to AC11/AD11 on the *FPGA* (USB_TXN/P0), with AC coupling (DC blocking) capacitor.
Will ... Masayoshi Furuta

02:22 PM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Correction: Replace FPGA with ARM Jonathan Cormier

10:25 AM MitySOM-AM57X PCB Development: RE: Is the USB SS connection correct?

Hi Masayoshi,
It looks like there is an error in the datasheet.
Pin 33/35 are connected to AC11/AD11 on the F... Michael Williamson

06:39 AM MitySOM-AM57X PCB Development: Is the USB SS connection correct?

The J3Pin-Out (Table 7) of the MitySOM-AM57 System on Module data sheet describes the USB3.0 SuperSpeed terminals a... Masayoshi Furuta

03:11 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: Qemu pointers to try out mitysom-5csx Cyclone V Arm cortex a9 code

Hi Dan,
Thanks for the response. We do not have an actual hardware to do basic testing of the code. We are develop... Saumil Patel

07/12/2023

06:44 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: Qemu pointers to try out mitysom-5csx Cyclone V Arm cortex a9 code

Hi Saumil,
We do not have any experience using QEMU, our development is normally done on the actual hardware.
M... Daniel Vincelette

05:49 PM MitySOM-5CSX Altera Cyclone V Software Development: Qemu pointers to try out mitysom-5csx Cyclone V Arm cortex a9 code

Hello,
Is there a wiki or any pointers to simulate using QEMU? I ran .\qemu-system-arm.exe -machine help and it li... Saumil Patel