Project

General

Profile

Activity

From 05/02/2023 to 05/31/2023

05/31/2023

02:25 PM Software Development: RE: USB touch screen support for AM572x development board
> hid-generic 0003:0461:0022.0003: input: USB HID v1.00 Device
Okay good news, looks like the HID driver is getting ...
Jonathan Cormier
05:44 AM Software Development: RE: USB touch screen support for AM572x development board
Hi Jonathan,
Thank you for your support.
When i connected the Newhaven Display's USB with the AM572x Developmen...
Sandeep Sivadas
12:08 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
Hi Michael,
We are planned to do our ethernet design with IEEE 1588 PTP hardware support with RJ45 and Fibre commu...
Sandeep Sivadas

05/30/2023

07:26 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
FYI... Jonathan Cormier
07:25 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
Sandeep Sivadas wrote:
> Hi,
>
> We have to develop a QT application for our AM57x Development board. which vers...
Jonathan Cormier
05:30 AM Software Development: Support for Qt creator application for MitySOM AM57x
Hi,
We have to develop a QT application for our AM57x Development board. which version of QT creator is supported ...
Sandeep Sivadas
05:48 PM Software Development: RE: USB touch screen support for AM572x development board
Newhaven doesn't provide a lot of details on this USB touch interface other than it's a "USB-HID device". Which I wo... Jonathan Cormier
05:50 AM Software Development: USB touch screen support for AM572x development board
Hi,
We are using a Capacitive HDMI TFT Module (Make: Newhaven) with AM572x development board. On booting the linu...
Sandeep Sivadas
02:56 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
Hi Sandeep,
As mentioned in the datasheet, all of the VDDSHVx pins with the exception of VDDSHV8 (for the MMC/SD i...
Michael Williamson
12:28 PM PCB Development: Design support for DP83640 Phy IC for use with AM57x SOM
Hi,
We have some doubts regarding designing the Ethernet circuit using DP83640(For PTP hardware time stamp).
1....
Sandeep Sivadas
02:22 PM Software Development: RE: Example USB (usb 3.0 port) is not work
Was able to verify that when plugged into a usb2.0 port, the gadget reports high-speed config and then reports super-... Jonathan Cormier

05/26/2023

07:58 AM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
Hi Michael,
1. We tried to convert the Altium files to Cadence, then it shows converts only ASCII format file of P...
Sandeep Sivadas

05/25/2023

12:38 PM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
HI Sandeep,
1. The design files are in Altium Designer. I will ask Tom Catalino to send you an updated version o...
Michael Williamson
10:30 AM Software Development: RE: Query - Example Baseboard I2C Power Monitor
The original linux kernel driver for the LTC2945 has a 0.001 Ohm resistor value hardcoded in the logic that converts ... Michael Williamson
05:24 AM Software Development: Query - Example Baseboard I2C Power Monitor

Hi,
We tested the i2C power monitor as per the below link and got the result as shown below.
https://support.c...
Sandeep Sivadas

05/24/2023

12:51 PM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
Hi Michael,
Thank you for the clarification.
1. Can we get the Allegro cadence PCB file for the MitySOM AM572x...
Sandeep Sivadas
11:31 AM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
Hi Sandeep,
I am sorry for the confusion.
The hirose datasheets don't appear to specify a "pin 1" for these con...
Michael Williamson
05:25 AM PCB Development: Mismatch in 100 Pin connector in schematic and datasheet
Hi,
There is a mismatch in 100 pin DF40HC(3.0)-100DS-0.4V(58) connector pin details in schematic design and datash...
Sandeep Sivadas

05/12/2023

08:00 AM Software Development: RE: Example USB (usb 3.0 port) is not work
* R59<notextile>(</notextile>USB_ID) behavior
> Can you measure the voltage on R59? (this is on the underside of t...
Masayoshi Furuta

05/11/2023

03:29 PM PCB Development: RE: eMMC support for MitySOM AM572x
Sandeep Sivadas wrote:
> Hi,
>
> We need to integrate eMMC Flash with MitySOM SOM. Please suggest appropriate Pa...
Jonathan Cormier
03:11 PM Software Development: RE: Example USB (usb 3.0 port) is not work
Note it can also be a good idea to try a usb-C connector in both directions in case one direction is broken. Jonathan Cormier
03:05 PM Software Development: RE: Example USB (usb 3.0 port) is not work
)Masayoshi Furuta wrote in message#6343:
> > tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
>
> The new...
Jonathan Cormier
01:21 AM Software Development: RE: Example USB (usb 3.0 port) is not work
> tisdk-rootfs-image-mitysom-am57x-20210909.rootfs.img.zip
The new image could NOT solve the problem either.
I ...
Masayoshi Furuta

05/10/2023

02:40 PM Software Development: RE: Example USB (usb 3.0 port) is not work
Jonathan Cormier wrote in message#6341:
> Masayoshi Furuta wrote:
> > https://support.criticallink.com/redmine/proj...
Jonathan Cormier
02:11 PM Software Development: RE: Example USB (usb 3.0 port) is not work
Masayoshi Furuta wrote:
> https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
>
> I ...
Jonathan Cormier
12:57 PM Software Development: Example USB (usb 3.0 port) is not work
https://support.criticallink.com/redmine/projects/mitysom_am57x/wiki/Example_usb
I tested with this procedure and ...
Masayoshi Furuta

05/09/2023

01:37 PM Software Development: RE: Yocto build for mitySOM AM57x
Sandeep Sivadas wrote in message#6337:
> Hi,
>
>
> 1. In the meantime, you should be able to use the released ...
Jonathan Cormier
04:29 AM Software Development: RE: Yocto build for mitySOM AM57x
Hi,
1. In the meantime, you should be able to use the released filesystem and replace just the kernel on it. And...
Sandeep Sivadas
08:37 AM PCB Development: eMMC support for MitySOM AM572x
Hi,
We need to integrate eMMC Flash with MitySOM SOM. Please suggest appropriate Part No: for the same.
What w...
Sandeep Sivadas

05/08/2023

07:19 PM Software Development: RE: Yocto build for mitySOM AM57x
Added some fixes for a few recipes which SRC urls changed slightly. Let me know if you run into any more issues. Jonathan Cormier

05/05/2023

01:55 PM Software Development: RE: Yocto build for mitySOM AM57x
Looks like it built successfully this time. I'll let you know how I get along with the systemd issue, I may not have... Jonathan Cormier
01:47 AM Software Development: RE: Yocto build for mitySOM AM57x
Hi,
I have tried to rebuild qtbase as told above. The log files are attaching here.
Thanks & regards
Sandeep s
Sandeep Sivadas

05/04/2023

10:18 PM Software Development: RE: Yocto build for mitySOM AM57x
Hi Sandeep,
I've run into some issues building the systemd package during the build. I am looking into it.
Jonathan Cormier
01:17 PM Software Development: RE: Yocto build for mitySOM AM57x
1. Great
2. I'm not sure what would have caused this file to get truncated. Seems like some kind of file corruptio...
Jonathan Cormier
08:45 AM Software Development: RE: Yocto build for mitySOM AM57x
Hi,
1. I tried the custom-crops modifications and got the menuconfig window.
2. I have tried to build MACHINE=m...
Sandeep Sivadas

05/03/2023

02:12 PM Software Development: RE: Yocto build for mitySOM AM57x
Sandeep Sivadas wrote in message#6329:
> Hi,
>
> Thank you for your support.
> I tried the updated steps for yo...
Jonathan Cormier
12:25 PM Software Development: RE: Yocto build for mitySOM AM57x
Hi,
Thank you for your support.
I tried the updated steps for yocto build and it worked fine.
1. The command i...
Sandeep Sivadas

05/02/2023

03:18 PM Software Development: RE: Yocto build for mitySOM AM57x
Wiki has been updated. Thanks for reporting this. Jonathan Cormier
03:07 PM Software Development: RE: Yocto build for mitySOM AM57x
Sandeep Sivadas wrote in message#6326:
> Hi,
>
> Thank you for your support.
> I have followed the steps in the...
Jonathan Cormier
05:40 AM Software Development: RE: Yocto build for mitySOM AM57x
Hi,
Thank you for your support.
I have followed the steps in the link you provided. https://support.criticallink....
Sandeep Sivadas
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)