Activity
From 05/16/2023 to 06/14/2023
06/14/2023
- 02:46 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Datasheet has been released
06/09/2023
- 04:53 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi,
For testing IEEE 1588 H/W time stamp application, we included DP83640 in our circuit. Since DP83640 doesn't ha...
06/07/2023
- 01:47 PM PCB Development: RE: eMMC support for MitySOM AM572x
Per this e2e post, it should be okay to use 1.8V signal levels with an eMMC.
https://e2e.ti.com/support/processors...- 07:25 AM PCB Development: RE: eMMC support for MitySOM AM572x
- Hi Jonathan,
We designed an eMMC circuit using *MTFC16GAPALBH-AIT*. As per the data sheet of MitySOM MMC2 signals ...
06/06/2023
- 07:06 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- The USB2_DM/DP supports 5V voltage level. Datasheet will be updated on next release.
- 02:11 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Thanks, I'll look into it. I'm pretty sure that's incorrect.
- 05:49 AM PCB Development: RE: Design support for USB for use with AM57x SOM
- Hi Jonathan,
*1. For USB2, it is mentioned that voltage level is 1.8V. We need to connect these signals to U...
06/05/2023
- 09:31 PM PCB Development: RE: Design support for USB for use with AM57x SOM
- Schematic review:
* Both schematics are using VUSB_VBUS1 as a net name. One of them is probably supposed to be VUSB... - Hi,
We need to integrate one USB 3.0, one USB 2.0 and one Debug USB with our application system.
1. For USB2, ...
06/02/2023
- 03:31 PM Software Development: RE: USB touch screen support for AM572x development board
- Note you can update the command line args for the HelloWorld example to work without weston as well.
!clipboard-20... - 03:29 PM Software Development: RE: USB touch screen support for AM572x development board
- Sandeep Sivadas wrote in message#6366:
> Hi Jonathan,
>
> We tried the evtest and weston commands. But the matri... - 05:47 AM Software Development: RE: USB touch screen support for AM572x development board
- Hi Jonathan,
We tried the evtest and weston commands. But the matrix GUI application is not responding to USB touc... - 02:51 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Sandeep Sivadas wrote in message#6367:
> Hi Jonathan
>
>
> We followed the guidelines as per the link https://... - 09:58 AM Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Hi Jonathan
We followed the guidelines as per the link https://support.criticallink.com/redmine/projects/mitysom...
05/31/2023
- 02:25 PM Software Development: RE: USB touch screen support for AM572x development board
- > hid-generic 0003:0461:0022.0003: input: USB HID v1.00 Device
Okay good news, looks like the HID driver is getting ... - 05:44 AM Software Development: RE: USB touch screen support for AM572x development board
- Hi Jonathan,
Thank you for your support.
When i connected the Newhaven Display's USB with the AM572x Developmen... - 12:08 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi Michael,
We are planned to do our ethernet design with IEEE 1588 PTP hardware support with RJ45 and Fibre commu...
05/30/2023
- 07:26 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
- FYI...
- 07:25 PM Software Development: RE: Support for Qt creator application for MitySOM AM57x
- Sandeep Sivadas wrote:
> Hi,
>
> We have to develop a QT application for our AM57x Development board. which vers... - Hi,
We have to develop a QT application for our AM57x Development board. which version of QT creator is supported ... - 05:48 PM Software Development: RE: USB touch screen support for AM572x development board
- Newhaven doesn't provide a lot of details on this USB touch interface other than it's a "USB-HID device". Which I wo...
- Hi,
We are using a Capacitive HDMI TFT Module (Make: Newhaven) with AM572x development board. On booting the linu... - 02:56 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
- Hi Sandeep,
As mentioned in the datasheet, all of the VDDSHVx pins with the exception of VDDSHV8 (for the MMC/SD i... - Hi,
We have some doubts regarding designing the Ethernet circuit using DP83640(For PTP hardware time stamp).
1.... - 02:22 PM Software Development: RE: Example USB (usb 3.0 port) is not work
- Was able to verify that when plugged into a usb2.0 port, the gadget reports high-speed config and then reports super-...
05/26/2023
- 07:58 AM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Michael,
1. We tried to convert the Altium files to Cadence, then it shows converts only ASCII format file of P...
05/25/2023
- 12:38 PM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- HI Sandeep,
1. The design files are in Altium Designer. I will ask Tom Catalino to send you an updated version o... - 10:30 AM Software Development: RE: Query - Example Baseboard I2C Power Monitor
- The original linux kernel driver for the LTC2945 has a 0.001 Ohm resistor value hardcoded in the logic that converts ...
Hi,
We tested the i2C power monitor as per the below link and got the result as shown below.
https://support.c...
05/24/2023
- 12:51 PM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Michael,
Thank you for the clarification.
1. Can we get the Allegro cadence PCB file for the MitySOM AM572x... - 11:31 AM PCB Development: RE: Mismatch in 100 Pin connector in schematic and datasheet
- Hi Sandeep,
I am sorry for the confusion.
The hirose datasheets don't appear to specify a "pin 1" for these con... - Hi,
There is a mismatch in 100 pin DF40HC(3.0)-100DS-0.4V(58) connector pin details in schematic design and datash...
Also available in: Atom
Go to top