Project

General

Profile

Activity

From 06/06/2023 to 07/05/2023

06/23/2023

08:07 PM PCB Development: RE: Unconnected pins, board dimensions and hole positions
Hello.
1. Generally speaking, all of the MFIO pins are direct connects to the AM57xx CPU device and if they are un...
Michael Williamson
06:51 PM PCB Development: Unconnected pins, board dimensions and hole positions

Posting on behalf of customer:
1.The J1 and J3 connectors of MitySOM-AM57 are described as “MFIO” for “Type”.
...
Thomas Catalino

06/14/2023

02:46 PM PCB Development: RE: Design support for USB for use with AM57x SOM
Datasheet has been released Jonathan Cormier

06/09/2023

04:53 PM PCB Development: RE: Design support for DP83640 Phy IC for use with AM57x SOM
Hi,
For testing IEEE 1588 H/W time stamp application, we included DP83640 in our circuit. Since DP83640 doesn't ha...
Sandeep Sivadas

06/07/2023

01:47 PM PCB Development: RE: eMMC support for MitySOM AM572x

Per this e2e post, it should be okay to use 1.8V signal levels with an eMMC.
https://e2e.ti.com/support/processors...
Jonathan Cormier
07:25 AM PCB Development: RE: eMMC support for MitySOM AM572x
Hi Jonathan,
We designed an eMMC circuit using *MTFC16GAPALBH-AIT*. As per the data sheet of MitySOM MMC2 signals ...
Sandeep Sivadas

06/06/2023

07:06 PM PCB Development: RE: Design support for USB for use with AM57x SOM
The USB2_DM/DP supports 5V voltage level. Datasheet will be updated on next release. Jonathan Cormier
02:11 PM PCB Development: RE: Design support for USB for use with AM57x SOM
Thanks, I'll look into it. I'm pretty sure that's incorrect. Jonathan Cormier
05:49 AM PCB Development: RE: Design support for USB for use with AM57x SOM
Hi Jonathan,
*1. For USB2, it is mentioned that voltage level is 1.8V. We need to connect these signals to U...
Sandeep Sivadas
 

Also available in: Atom

Go to top
Add picture from clipboard (Maximum size: 1 GB)