Project

General

Profile

iproute2 for SocketCAN with 3.2 Kernel

Added by edward lambert over 8 years ago

The iproute2 utility for linux 3.2 seems to be unavailable from opkg. I am therefore unable to run the example in the wiki, which I was hoping to use to prove the CAN interface. Is there another way to access the CAN interface or to acquire this utility that you know of?

The current feed for opkg is
src/gz base http://feeds.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base

Thanks,

Ed


Replies (5)

RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago

Which wiki page are you referencing?

RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago

There should be no need to install any packages. I've attached our cantest script. It expects can0 to be connected to can1.

RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago

Added a 335x specific CAN wiki page: Using_CAN_port

RE: iproute2 for SocketCAN with 3.2 Kernel - Added by edward lambert over 8 years ago

Thanks for the quick response.

I'm afraid I posted this in the wrong topic yesterday, I am using an Industrial IO board with an omap L138 arm 9, not a cortex A8.

I am referring to this wiki page https://support.criticallink.com/redmine/projects/indio/wiki/CAN_support.

RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago

Okay, would you mind creating a forum post over there as it may help people find it in the future who are looking for a similar issue?

    (1-5/5)
    Go to top
    Add picture from clipboard (Maximum size: 1 GB)