Forums » Software Development »
iproute2 for SocketCAN with 3.2 Kernel
Added by edward lambert over 8 years ago
The iproute2 utility for linux 3.2 seems to be unavailable from opkg. I am therefore unable to run the example in the wiki, which I was hoping to use to prove the CAN interface. Is there another way to access the CAN interface or to acquire this utility that you know of?
The current feed for opkg is
src/gz base http://feeds.angstrom-distribution.org/feeds/v2012.05/ipk/eglibc/armv5te/base
Thanks,
Ed
Replies (5)
RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago
Which wiki page are you referencing?
RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago
There should be no need to install any packages. I've attached our cantest script. It expects can0 to be connected to can1.
| cantest.sh (2.79 KB) cantest.sh |
RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago
Added a 335x specific CAN wiki page: Using_CAN_port
RE: iproute2 for SocketCAN with 3.2 Kernel - Added by edward lambert over 8 years ago
Thanks for the quick response.
I'm afraid I posted this in the wrong topic yesterday, I am using an Industrial IO board with an omap L138 arm 9, not a cortex A8.
I am referring to this wiki page https://support.criticallink.com/redmine/projects/indio/wiki/CAN_support.
RE: iproute2 for SocketCAN with 3.2 Kernel - Added by Jonathan Cormier over 8 years ago
Okay, would you mind creating a forum post over there as it may help people find it in the future who are looking for a similar issue?
