Mity CPU Platforms » MitySOM-5CSX Altera Cyclone V

01/14/2019

05:55 PM Software Development: RE: RGMII pad skew on KSZ9031

Thanks for the reply Mike. I'll talk to the software team and see if VxWorks resets the PHY. If not, then we will try... Shane Avery

11:22 AM Software Development: RE: RGMII pad skew on KSZ9031

Are you using uBoot to boot VxWorks?
I don't think there is enough space in the preloader to include the MDIO driv... Michael Williamson

04:10 PM Software Development: RE: Second PHY MDIO interface

Hi Vidar,
It looks like you are using Critical Link's 4.9 branch, is that correct?
Have you rebuilt and updated... Daniel Vincelette

02:36 PM Software Development: Second PHY MDIO interface

Hi
I have added a second PHY to my board and connected it through the FPGA IO. I am using HPS EMAC0 and have added... V J

01/13/2019

09:55 PM Software Development: RGMII pad skew on KSZ9031

We've got a custom board which is based on CriticalLink's baseboard. The PHY is the 9031. Try as we might to maintain... Shane Avery

01/03/2019

01:35 PM Software Development: RE: MitySOM-5CSX read-only Linux

Thanks a lot Mike.
That does seem to setup the filesystem as read-only, and is quite a simple solution.
Mathew Jones

01/02/2019

09:19 AM Software Development: Duplicated name warnings

Hi
After updating my dts/dtb file I have an issue with the device tree generation. When booting the board I get a lo... V J

08:27 AM Software Development: RE: LinuxPTP: 1PPS output is running at 0.1Hz

Theses issues are related to the stmmac driver.
See user forum: https://sourceforge.net/p/linuxptp/mailman/linuxptp-... V J

12/20/2018

03:23 PM Software Development: RE: MitySOM-5CSX read-only Linux

Hi Mathew,
What you're describing sounds like filesystem corruption. If you have a read/write filesystem that you ... Mike Fiorenza

12/18/2018

03:26 PM Software Development: MitySOM-5CSX read-only Linux

Hi,
We're running everything from SD card, all based on the original image for the dev kit with some kernel mods (Li... Mathew Jones