Activity
From 09/17/2013 to 10/16/2013
10/16/2013
- Are there any tutorials on implementing custom logic on the Cyclone V FPGA
and then joining it with one of the inter... - 05:43 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: sudo on xubuntu
- Thanks Bob,
That did the trick.
I have another question, but I'll start another thread for it.
- 05:17 PM MitySOM-5CSX Altera Cyclone V Software Development: RE: sudo on xubuntu
- Hi Rich, please try the password "user" when using sudo.
-Bob
- I need to gain access to administrator level via sudo on the xubuntu release
that was issued with my MityARM-5CSX d... - 09:48 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- I tried some tests as you suggested.
file size = 64 Mbytes
scp: 60 sec (using WinSCP)
sftp: 53 sec (using W...
10/14/2013
- 02:51 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- Note that all of my experiments have been on a mitydsp copying from nand and not sata.
- 02:49 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- I built the latest busybox using instructions provided and ran the ftpd service as described below and got a transfer...
- 02:28 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- TFTP is not very efficient depending on how it is configured.
- 02:27 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- It might be easier to export the mitydsp filesystem via NFS or SAMBA and have windows access it directly.
Or hav... - 02:23 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- I was able to transfer a 6MB file in about 13 seconds which is about 472 kB/s.
And the same transfer done over scp... - 02:14 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- I switched to using the http://tftpd32.jounin.net/ program as the tftp server as I was unable to get the other one to...
- 02:06 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- My guess is that windows firewall is blocking the connection. You should be able to google how to allow an inbound c...
- 01:58 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- Trying the Solar Winds tftp server. Installed it, ran it.
On my target:
root@mityomap:/mnt/sata# tftp -p -l te... - 01:53 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- Mary,
The angstrom distribution we use for our baseline does not include a TFTP server in its package repository. ... - 01:25 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- It is possible. But i would test the other direction first to see if you get the speeds your looking for.
-Jonathan - 01:24 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- The Windows PC would be requesting the file. So, I think we want the som to be the server. Is this possible?
Mary - 01:16 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: File transfer methods
- Mary,
There should be a tftp dameon package available for this platform.
Which device will be triggering this... - What is the most efficient file transfer method that this distro supports? We expect to generate very large files (u...
10/11/2013
- 11:30 AM MityDSP-L138 (ARM9 Based Platforms) PCB Development: RE: MityDSP-L138F LVDS lengths? .... (posted on behalf of a customer)
- Hi Angela,
The following traces' length are reported from our tool.
Let us know if you need anything else. Than... - 07:45 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: IndustrialIO board with Mity-DSP-L138F, No ETH PHY detected
- One thing that sticks out..
you flashed the kernel to 0x100000 instead of 0x10000 (which is where you erased).
wh... - I am using an IndustrialIO Rev 2B board with a Mity-DSP-L138FI-236-RL SOM in which uboot reports:
Resetting ethern...
10/10/2013
- My company is using your MityDSP-L138F SoM in a research prototype. The design has a high speed LVDS bus to the Spart...
- 07:38 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: EMIFA write timing
- Hi Steven,
Using a separate chip select (and adjusting the wait timings setup in u-Boot) should make this feasible... - 12:52 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: EMIFA write timing
- To read the THS1206 I need two chip selects, which can be the core cs and an address bit. Then I need a read pulse w...
10/09/2013
- 01:36 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: EMIFA write timing
- Do you mean for the EMIFA from the OMAP-L138 or the signals from the EMIFA_iface.vhd module that CL provides?
I do... - Is there a diagram for the EMIFA write timing like the one in the wiki for read timing? I am having some problems im...
10/08/2013
- 06:04 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: UPP "start" signal ignored in receive mode?
- FYI, for anyone reading this in the future:
The root of the problem was that the FPGA was sending longer or shorte... - 04:12 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- You bring up a very good point. If you are only moving 16 words every 4us, the overhead to setup the DMA may be too ...
- 04:09 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- By the way, David and Mike, thanks for the information on the cache functions. When I insert them into my example, I...
- 03:52 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- Thanks, David for all that information - as you can tell I am not very experienced in DSP programming. I hope you wo...
- 03:19 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- The QDMA can be used for just about anything the EDMA can be used for, in terms of transfers, but it can't be trigger...
- 01:30 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- First to David Rice: This test was just meant to get me started - ultimately I want to transfer 16 bit words from ext...
- 01:20 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- Hello Steven,
Is it possible that you need to invalidate your cache prior to validating the transfer has completed... - 01:01 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Can't get DMA using low level driver working on DSP
- Hi Steven,
I looked briefly at your code and nothing jumped out at me...
I am the one who developed Critical Li... - I desperately need some help here. I have been trying for 3 days to get DMA working on the DSP. I have attached a C...
10/07/2013
- 08:00 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO sharing between ARM and DSP
- Hi Steven,
We don't have any partitioning schemes in place, as it is very application specific. In fact, we don't...
10/06/2013
- 01:28 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- I too am having a lot of trouble implementing EDMA on the DSP using LLD. But I don't understand Lars' last post. As...
10/05/2013
- According to the information in this link:
http://e2e.ti.com/support/embedded/linux/f/354/t/47756.aspx
the linu...
09/30/2013
- 12:36 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP GPIO interrupts (No-FPGA)
- Hello Steven,
1. It is highly recommended to set the pins up in a matter you want to use them. The processor may b... - 07:09 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: watchdog causes strange side effects
- Ah, OK.
There is a "post on TI's E2E site":http://e2e.ti.com/support/embedded/bios/f/355/t/74121.aspx that talks... - 06:44 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: watchdog causes strange side effects
- Got some more insight. When I start kicking the watchdog, the dspbios function TSK_sleep() fails (sleeps forever). It...
09/29/2013
- 04:24 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: watchdog causes strange side effects
- Thanks for the fast reply !
Model #:L138-FI-381RL-3B
/proc/config.gz attached
Further debugging revealed that ... - 07:53 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: watchdog causes strange side effects
- Is it possible the watchdog is firing before you kick it? How much margin do you have between the kick and the confi...
- 07:51 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: watchdog causes strange side effects
- None come to mind right away....
What model number SOM are you using?
What version of the kernel are you using,... - 03:01 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Audioexample with DSP-ARM-Communication
- Hej Mike,
if your support is for DSPBios and DSPLink and there is no much overhead, then I will stick to that.
... - 09:09 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Audioexample with DSP-ARM-Communication
- DSPBIOS (or SYSBIOS) does not introduce much overhead, it should be fine for you application. If you need to, you co...
09/28/2013
- Hi,
I am having a lot of problems with the watchdog.
1) After kicking it for several minutes, a kernel panic o...
09/27/2013
- 01:36 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Debugging in CCSv5 using GDB
- I followed option 2, and now have GDB working. I did a lot of searching on the net, and it seems that the issue with...
09/26/2013
- 11:59 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SATA Interface R/W Performance
- Check this page from TI.
http://processors.wiki.ti.com/index.php/DaVinci_PSP_03.21.00.04_Device_Driver_Features_an... - Hi There,
Do you have any read/write performance figures for the SATA interface on the MityDSP/Industrial I/O
boa...
09/25/2013
- 04:41 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO in linux
- I looked at that file, and the array includes all the Bank 0 pins, so they all should be acting as GPIO - but accordi...
- 03:44 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO in linux
- You will need to edit the baseboard file you are using and rebuild the linux kernel. For instance, the industrial IO ...
- 03:09 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO in linux
- How do you set pinmux values in linux?
- 02:41 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: GPIO in linux
- Make sure that the pinmux is set correctly so that GPIO0 functions as a GPIO.
\Greg - I want to use GPIO pins in my application. Doing the following:...
09/20/2013
- Hej,
I'm new to the TI OMAP and previously worked with AD Sharc-Processors.
For a new product I switched to the...
09/19/2013
- 05:33 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Hi Lars,
This is interesting... I did not think that the linux code was using the Quick DMA PaRAMS. I know you ha... - 05:09 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Dave,
I think I found the problem.
When comparing the board definition file for the da850 evm (board-da850-evm.c) ... - 04:17 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- I will have to give that some thought. It was my understanding that the two processor each had use of a different pa...
- 02:54 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Hi Dave,
I have done a full matrix of experiments, interrupt 7 or 8, with and without MMC in the kernel, and booting... - 03:54 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SYS/BIOS and SYSLINK
- It seems to me that TI is moving to SYS/BIOS and DSP/BIOS will soon be deprecated. Most of the really useful trainin...
- 03:00 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Thanks for the procedure. In case you weren't aware I wrote up a guide on doing this without the kernel being stored...
- 02:41 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- The procedure is simple - I create a UBI image (mkfs.ubifs & ubinize) with uImage and rootfile system volumes and pro...
09/18/2013
- 09:20 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: SYS/BIOS and SYSLINK
- Don't have any immediate plans to update, though they should compile against SYS/BIOS without much modification.
W... - 05:48 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Dave,
I have confirmed that if I run Linux off the built in flash disk (and disable MMC support) I can do DMA transf... - 05:46 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Hi Lars,
I am currently working on a project that uses the QDMA class to move data between the FPGA and memory, an... - 02:19 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Thanks Dave,
That was a lot of useful information!
I did indeed pull in some off the mark libraries during link tim... - 01:08 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- I assume you are not actually using any .c files from the EDMA code? If so, get rid of those. All you need from the...
- 12:37 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Hi Dave,
Thanks for the reply.
I tried that - still the same problem.
My sense is that this has something to d... - 11:26 AM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: DSP DMA crashes Linux
- Hi Lars,
The tcDspQDMA class handles all of the setup for the dma, so you don't need the HWI_eventMap() call. Tha...
09/17/2013
- 02:50 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Michael,
I've added your changes including my alternative change to a test branch on my machine. If you could tes... - 02:48 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Ok cool. We've never tried storing the kernel in a ubifs partition. If you have it working I'd be interested in you...
- 02:31 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- ...
- 02:17 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Do you have a reference for your first change? Or did you find this through trial and error?
- 02:14 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- Michael,
You should be able to replace your second change with:... - 01:41 PM MitySOM-335x (ARM Cortex-A8 Based Products) Software Development: RE: Writing UBIFS rootfs to AM3354 with 512MB NAND
- To boot from UBI with the 512MB NAND, I had to modify the 2013.01 branch bootloader:...
- 12:35 PM MityDSP-L138 (ARM9 Based Platforms) FPGA Development: RE: BUSY and AWAKE LEDs
- D2 (AWAKE) is connected to pin P15 of the FPGA. Drive high to light.
D3 (BUSY) is connected to pin P16 of the FPGA.... - On my L138-DI-225-RI board, I observe two LEDs labeled "BUSY" and "AWAKE". These are located next to the "DONE" LED ...
- Hi,
I ran into a basic problem testing out DMA transfers on the DSP to see if the speed improvement is worth the eff...
Also available in: Atom
Go to top
