Activity

From 12/01/2025 to 12/30/2025

04:14 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Building the MitySOM-5CSX: Hi Seth,
Happy Holidays!
Ok, I was able to rebuild the device tree as you instructed and got it all to work, includ... John Iannuzzi

10:55 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P PCB Development: RE: Fixture to Flash Image in Production: Holden Wozniak wrote:
> We are looking into ways to flash an image onto a SOM with eMMC in production.
>
> Our cu... Jonathan Cormier
08:28 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P PCB Development: Fixture to Flash Image in Production: We are looking into ways to flash an image onto a SOM with eMMC in production.
Our current thought was to utilize ... Holden Wozniak

08:29 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: MitySOM-5CSX Dev Kit – USB OTG J401 not detecting USB devices: Hi Atef,
We just doubled checked on our side that the image you mentioned (Yocto (Poky 2.4.4, kernel 5.4.23-yocto-... Mike Fiorenza
04:41 PM MitySOM-5CSX Altera Cyclone V FPGA Development: MitySOM-5CSX Dev Kit – USB OTG J401 not detecting USB devices: Hello,
I am using a MitySOM-5CSX SOM on the standard Critical Link carrier (development kit) with Yocto (Poky 2.4.4,... Atef Dorai
07:18 AM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hello,
I am using a MitySOM-5CSX SOM on the standard Critical Link carrier (development kit) with Yocto (Poky 2.4.4,... Atef Dorai

02:54 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hi Atef,
You should be able to do this via ethtool:... Daniel Vincelette
02:50 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hi Zach,
Could you please generate a Linux image for the 5CSX-H6-4YA based on the Linux image available at the fol... Atef Dorai
10:25 AM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hello,
For layout, the two groups you have outlined in your schematic snippet should be matched in length and id... Michael Williamson
08:47 AM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hi Zach,
Just a quick update on my side.
I am now able to communicate over Ethernet with our custom carrier board... Atef Dorai
08:15 AM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hi Zach,
Thank you for your reply.
I ran ethtool eth0 | grep PHYAD on my system, and it confirms that the PHY is de... Atef Dorai

09:39 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: Uart issue in Am62P: Hi Rajkumar,
Just following up Jonathan Cormier
05:40 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Ethernet PHY configuration and SSH access: Hi Atef,
The image you downloaded should have an SSH server (OpenSSH) running by default, yes. @ps@ by default doe... Zachary Miller
03:52 PM MitySOM-5CSX Altera Cyclone V FPGA Development: Ethernet PHY configuration and SSH access: Hello,
I am working with a MitySOM-5CSx module on my own custom carrier board and I am seeing different behavior dep... Atef Dorai

09:55 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: uBoot I2C Speed Command [MityDSP L138]: 2019 with i2c mods
Flashing u-boot based on https://support.criticallink.com/redmine/projects/arm9-platforms/wiki/... Jonathan Cormier
09:45 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: uBoot I2C Speed Command [MityDSP L138]: By default the 2019 u-boot doesn't support multiple i2c buses. Though I was able to tweak some code to seemingly get... Jonathan Cormier
09:29 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: uBoot I2C Speed Command [MityDSP L138]: Testing the 2019 u-boot and i2c speed command does appear to be supported though I didn't scope the lines to prove it... Jonathan Cormier
07:47 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Configuring OMAP-L138 peripherals from uBoot: The latest L138 RTOS SDK 06_03_00_106 for the L138 does have documentation for MCASP and a bunch of other peripherals... Jonathan Cormier
04:17 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Configuring OMAP-L138 peripherals from uBoot: Hi Michael, I created a e2e question asking TI about MCASP support on the DSP. https://e2e.ti.com/support/microcontro... Jonathan Cormier

08:04 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Configuring OMAP-L138 peripherals from uBoot: Jonathan,
If StarterWare/BareMetal are against the grain, please point me towards DSPBios code/examples that use McA... Michael B
07:27 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: Configuring OMAP-L138 peripherals from uBoot: Hi Michael, We have only used the DSP with TI's DSPBios RTOS. It should already have abstraction layers for most of... Jonathan Cormier

10:46 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: uBoot I2C Speed Command [MityDSP L138]: Michael B wrote:
> Hi All,
> I'm in the middle of debugging some I2C issues and was curious how the uBoot i2c speed... Jonathan Cormier
09:39 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: RE: uBoot I2C Speed Command [MityDSP L138]: As a follow up, is there any way to test I2C 1 bus through uBoot? Michael B
09:20 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: uBoot I2C Speed Command [MityDSP L138]: Hi All,
I'm in the middle of debugging some I2C issues and was curious how the uBoot i2c speed command is handled. I... Michael B
09:38 PM MityDSP-L138 (ARM9 Based Platforms) Software Development: Configuring OMAP-L138 peripherals from uBoot: Hi all,
I am interested in running a bare metal application on just the DSP core, and would like some help configuri... Michael B

12:47 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Issue booting encrypted bitstream on MitySOM-5CSx evaluation board: Thanks, it works. Atef Dorai

04:20 PM MitySOM-5CSX Altera Cyclone V FPGA Development: RE: Issue booting encrypted bitstream on MitySOM-5CSx evaluation board: Atef,
Can you make sure you have the MSEL set appropriately per the table below?
!image.png! Mike Fiorenza
03:40 PM MitySOM-5CSX Altera Cyclone V FPGA Development: Issue booting encrypted bitstream on MitySOM-5CSx evaluation board: Hello,
I am trying to test bitstream encryption on a MitySOM-5CSx evaluation board and I am running into an issue du... Atef Dorai
12:30 PM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: RE: Uart issue in Am62P: Hi Rajkumar,
Is the only difference between the AM62P working and not the use of the application code vs. the loop... Michael Williamson
04:37 AM MitySOM-AM62, MitySOM-AM62A, & MitySOM-AM62P Software Development: Uart issue in Am62P: Hi,
We are working with the Critical Link AM62P and AM62a SoM and have installed Debian 13 on am62P the system. We... Rajkumar Dumala

Also available in: Atom

Go to top

Mity CPU Platforms