Dual Bottom Side Connector Information¶
The MitySOM-A10S utilizes 2 connectors on the bottom of the module. The connectors are described below.
Note: The final board to board stack height of the connectors below is 10mm.
144 Pin Connector Details¶
| Manufacturer | Part Number | Where Used | Reference Designator |
| Hirose | FX10A-144P-SV1 | Module | J600 |
| Hirose | FX10-144IP-8H(03) | Interposer | N/A |
| Hirose | FX10A-144P-SV1 | Baseboard | J202 |
320 Pin Connector Details¶
| Manufacturer | Part Number | Where Used | Reference Designator | Individual Stack Height |
| Samtec | SEAM-40-03.5-S-08-2-A-K-TR | Module | J4 | 3.5mm |
| Samtec | SEAF-40-06.5-L-08-1-A-K-TR | Baseboard | J201 | 6.5mm |
Baseboard/Development Board to Module Standoff and Screws¶
Based on the above connectors the hardware used with our development boards is as follows
| Component | Quantity | Manufacturer | Part Number | Height/Length | Thread |
| Standoff | 4 | Lyn-Tron, Inc | AA5083-3050-10.0-00 | 10mm | Female M3x0.5 |
| Screws | 8 | McMaster-Carr | 92000A116 | 6mm | Male M3x0.5 |
Please contact your Critical Link account representative for further assistance in confirming compatibility of any connector.
Go to top
